[Dannz]

XP & SP2 installed & WU worked fine - recently started to get failed error
messages for all critical updates (weird, because the recent Windows
installer through WU updated OK??)
The error code is D0000006?
I'm using Adaware & Spyware doctor & made sure cleaned everything is clean -
also using Trend Micro internet security for virus & firewall protection.
Any ideas please?
Thanx

[Patti MacLeod]

Hi Dannz,

That error may be due to bad blocks on your hard drive. Open Event Viewer
(Start>Run key in eventvwr.msc then click on OK or hit ENTER) and then click
on System in the left pane. Check the right pane for any Errors that are
related to Disk. If there are Disk Errors that occur around the same time as
your failed updates, double-click on them to view the Description........if
they say something like this:
"The device, \Device\Harddisk0\D, has a bad block"
then boot into Safe Mode with Command Prompt, and key in:
chkdsk /r
then hit ENTER.

When the chkdsk has been performed, and any errors repaired, restart in
normal mode and try d/loading the updates.



Regards,

--
Patti MacLeod
Microsoft MVP - Windows Shell/User

"Dannz" <Dannz@discussions.microsoft.com> wrote in message
news:DC2964C3-A540-492D-8EDE-CF40B3CDECBE@microsoft.com...
> XP & SP2 installed & WU worked fine - recently started to get failed error
> messages for all critical updates (weird, because the recent Windows
> installer through WU updated OK??)
> The error code is D0000006?
> I'm using Adaware & Spyware doctor & made sure cleaned everything is
clean -
> also using Trend Micro internet security for virus & firewall protection.
> Any ideas please?
> Thanx

[Dannz]

Thanx Patti - that was spot-on! All 12 updates now complete - you're a legend!

"Patti MacLeod" wrote:

> Hi Dannz,
>
> That error may be due to bad blocks on your hard drive. Open Event Viewer
> (Start>Run key in eventvwr.msc then click on OK or hit ENTER) and then click
> on System in the left pane. Check the right pane for any Errors that are
> related to Disk. If there are Disk Errors that occur around the same time as
> your failed updates, double-click on them to view the Description........if
> they say something like this:
> "The device, \Device\Harddisk0\D, has a bad block"
> then boot into Safe Mode with Command Prompt, and key in:
> chkdsk /r
> then hit ENTER.
>
> When the chkdsk has been performed, and any errors repaired, restart in
> normal mode and try d/loading the updates.
>
>
>
> Regards,
>
> --
> Patti MacLeod
> Microsoft MVP - Windows Shell/User
>
> "Dannz" <Dannz@discussions.microsoft.com> wrote in message
> news:DC2964C3-A540-492D-8EDE-CF40B3CDECBE@microsoft.com...
> > XP & SP2 installed & WU worked fine - recently started to get failed error
> > messages for all critical updates (weird, because the recent Windows
> > installer through WU updated OK??)
> > The error code is D0000006?
> > I'm using Adaware & Spyware doctor & made sure cleaned everything is
> clean -
> > also using Trend Micro internet security for virus & firewall protection.
> > Any ideas please?
> > Thanx
>
>
>

[Patti MacLeod]

You're welcome, Dannz! :-)



Regards,

--
Patti MacLeod
Microsoft MVP - Windows Shell/User

"Dannz" <Dannz@discussions.microsoft.com> wrote in message
news:A8B4814E-8A72-45F7-92C6-2DC253CAB0B5@microsoft.com...
> Thanx Patti - that was spot-on! All 12 updates now complete - you're a
legend!
>
> "Patti MacLeod" wrote:
>
> > Hi Dannz,
> >
> > That error may be due to bad blocks on your hard drive. Open Event
Viewer
> > (Start>Run key in eventvwr.msc then click on OK or hit ENTER) and then
click
> > on System in the left pane. Check the right pane for any Errors that are
> > related to Disk. If there are Disk Errors that occur around the same
time as
> > your failed updates, double-click on them to view the
Description........if
> > they say something like this:
> > "The device, \Device\Harddisk0\D, has a bad block"
> > then boot into Safe Mode with Command Prompt, and key in:
> > chkdsk /r
> > then hit ENTER.
> >
> > When the chkdsk has been performed, and any errors repaired, restart in
> > normal mode and try d/loading the updates.
> >
> >
> >
> > Regards,
> >
> > --
> > Patti MacLeod
> > Microsoft MVP - Windows Shell/User
> >
> > "Dannz" <Dannz@discussions.microsoft.com> wrote in message
> > news:DC2964C3-A540-492D-8EDE-CF40B3CDECBE@microsoft.com...
> > > XP & SP2 installed & WU worked fine - recently started to get failed
error
> > > messages for all critical updates (weird, because the recent Windows
> > > installer through WU updated OK??)
> > > The error code is D0000006?
> > > I'm using Adaware & Spyware doctor & made sure cleaned everything is
> > clean -
> > > also using Trend Micro internet security for virus & firewall
protection.
> > > Any ideas please?
> > > Thanx
> >
> >
> >