Re: Can't get updates at all



Feniman
07-09-2005, 10:35 PM
Patti.
Many thanks for your advice on this problem. I too had this failure to
access updates, I used the bat file and got instant results.
Thanks again.
Vin

"Patti MacLeod" wrote:

> Hi Diane,
>
> Give this a try..........
>
>
> Go to Start>Run and key in:
> net.exe stop wuauserv
> Click on OK or hit ENTER
>
>
> Go to Start>Run and key in:
> regsvr32 wuapi.dll
> Click on OK or hit ENTER
> Click on OK in the RegSvr32 dialogue box
>
>
> Start>Run and key in:
> regsvr32 wups.dll
> Click on OK or hit ENTER
> Click on OK in the RegSvr32 dialogue box
>
>
> Start>Run and key in:
> regsvr32 wuaueng.dll
> Click on OK or hit ENTER
> Click on OK in the RegSvr32 dialogue box
>
>
> Start>Run and key in:
> regsvr32 wuaueng1.dll
> Click on OK or hit ENTER
> Click on OK in the RegSvr32 dialogue box
>
>
> Start>Run and key in:
> regsvr32 wucltui.dll
> Click on OK or hit ENTER
> Click on OK in the RegSvr32 dialogue box
>
>
> Start>Run and key in:
> regsvr32 wuweb.dll
> Click on OK or hit ENTER
> Click on OK in the RegSvr32 dialogue box
>
>
> Start>Run and key in:
> regsvr32 jscript.dll
> Click on OK or hit ENTER
> Click on OK in the RegSvr32 dialogue box
>
>
> Start>Run and key in:
> regsvr32 atl.dll
> Click on OK or hit ENTER
> Click on OK in the RegSvr32 dialogue box
>
>
> Start>Run and key in:
> regsvr32 softpub.dll
> Click on OK or hit ENTER
> Click on OK in the RegSvr32 dialogue box
>
>
> Start>Run and key in:
> regsvr32 msxml3.dll
> Click on OK or hit ENTER
> Click on OK in the RegSvr32 dialogue box
>
>
> Start>Run and key in:
> net.exe start wuauserv
>
>
> Now try the Windows Update site.
>
>
> Alternatively, you could create a command script file to run the above
> commands in a Command Prompt window......
>
>
> Go to Start>Run
> Key in:
> cmd
> Click on OK or hit ENTER
>
>
> In the Command Prompt window, key in:
> notepad registerit.cmd
> Hit ENTER
>
>
> A Notepad window will open with a dialogue box asking if you want to create
> a new file. Click on Yes in the dialogue box.
>
>
> Copy/paste the following, between but not including the asterisks, into the
> Notepad window:
>
>
> *********************
> net stop wuauserv
>
>
> regsvr32 /s wuapi.dll
>
>
> regsvr32 /s wups.dll
>
>
> regsvr32 /s wuaueng.dll
>
>
> regsvr32 /s wuaueng1.dll
>
>
> regsvr32 /s wucltui.dll
>
>
> regsvr32 /s wuweb.dll
>
>
> regsvr32 /s jscript.dll
>
>
> regsvr32 /s atl.dll
>
>
> regsvr32 /s softpub.dll
>
>
> regsvr32 /s msxml3.dll
>
>
> net start wuauserv
> **********************
>
>
> When finished pasting the above commands into the Notepad window, go to
> File>Save then File>Exit.
>
>
> Back in the Command Prompt window, key in:
> registerit.cmd
> Then hit ENTER
>
>
> When the file is done running, and you're back at the C: prompt, key in:
> exit
> Then hit ENTER
>
>
> Now try the Windows Update site.
>
>
>
> Regards,
>
> --
> Patti MacLeod
> Microsoft MVP - Windows Shell/User
>
> "Diane" <Diane@discussions.microsoft.com> wrote in message
> news:3111EA2A-D53A-4AF9-A002-FF493B8C5F6A@microsoft.com...
> > When I go to the Windows Updates page, I never get further than the page
> that
> > says it's checking for the latest version of....NEVER goes farther than
> that.
> > How do I fix this problem so I can get updates?
>
>
>

Patti MacLeod
07-09-2005, 10:35 PM
You're very welcome, Vin! :-)



Regards,

--
Patti MacLeod
Microsoft MVP - Windows Shell/User

"Feniman" <Feniman@discussions.microsoft.com> wrote in message
news:13052951-3729-4E59-AA33-3B083A2FCCA4@microsoft.com...
> Patti.
> Many thanks for your advice on this problem. I too had this failure to
> access updates, I used the bat file and got instant results.
> Thanks again.
> Vin
>
> "Patti MacLeod" wrote:
>
> > Hi Diane,
> >
> > Give this a try..........
> >
> >
> > Go to Start>Run and key in:
> > net.exe stop wuauserv
> > Click on OK or hit ENTER
> >
> >
> > Go to Start>Run and key in:
> > regsvr32 wuapi.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> >
> > Start>Run and key in:
> > regsvr32 wups.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> >
> > Start>Run and key in:
> > regsvr32 wuaueng.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> >
> > Start>Run and key in:
> > regsvr32 wuaueng1.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> >
> > Start>Run and key in:
> > regsvr32 wucltui.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> >
> > Start>Run and key in:
> > regsvr32 wuweb.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> >
> > Start>Run and key in:
> > regsvr32 jscript.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> >
> > Start>Run and key in:
> > regsvr32 atl.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> >
> > Start>Run and key in:
> > regsvr32 softpub.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> >
> > Start>Run and key in:
> > regsvr32 msxml3.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> >
> > Start>Run and key in:
> > net.exe start wuauserv
> >
> >
> > Now try the Windows Update site.
> >
> >
> > Alternatively, you could create a command script file to run the above
> > commands in a Command Prompt window......
> >
> >
> > Go to Start>Run
> > Key in:
> > cmd
> > Click on OK or hit ENTER
> >
> >
> > In the Command Prompt window, key in:
> > notepad registerit.cmd
> > Hit ENTER
> >
> >
> > A Notepad window will open with a dialogue box asking if you want to
create
> > a new file. Click on Yes in the dialogue box.
> >
> >
> > Copy/paste the following, between but not including the asterisks, into
the
> > Notepad window:
> >
> >
> > *********************
> > net stop wuauserv
> >
> >
> > regsvr32 /s wuapi.dll
> >
> >
> > regsvr32 /s wups.dll
> >
> >
> > regsvr32 /s wuaueng.dll
> >
> >
> > regsvr32 /s wuaueng1.dll
> >
> >
> > regsvr32 /s wucltui.dll
> >
> >
> > regsvr32 /s wuweb.dll
> >
> >
> > regsvr32 /s jscript.dll
> >
> >
> > regsvr32 /s atl.dll
> >
> >
> > regsvr32 /s softpub.dll
> >
> >
> > regsvr32 /s msxml3.dll
> >
> >
> > net start wuauserv
> > **********************
> >
> >
> > When finished pasting the above commands into the Notepad window, go to
> > File>Save then File>Exit.
> >
> >
> > Back in the Command Prompt window, key in:
> > registerit.cmd
> > Then hit ENTER
> >
> >
> > When the file is done running, and you're back at the C: prompt, key in:
> > exit
> > Then hit ENTER
> >
> >
> > Now try the Windows Update site.
> >
> >
> >
> > Regards,
> >
> > --
> > Patti MacLeod
> > Microsoft MVP - Windows Shell/User
> >
> > "Diane" <Diane@discussions.microsoft.com> wrote in message
> > news:3111EA2A-D53A-4AF9-A002-FF493B8C5F6A@microsoft.com...
> > > When I go to the Windows Updates page, I never get further than the
page
> > that
> > > says it's checking for the latest version of....NEVER goes farther
than
> > that.
> > > How do I fix this problem so I can get updates?
> >
> >
> >


Re: Can't get updates at all