Stealth S80 DVI resolution



editor
07-09-2005, 09:59 PM
Hi,

Hard Ware: Diamond Stealth S80
O/S : Win98 SE

Problem: DVI output works only if monitor resolution is set to 640x480!
DVI output is very bad and it cuts monitor output from each edge. I
cannot see the top, bottom, left, and right edge of the display.

I installed the drivers that came with the card.

Any advise is good advise.

Thank you.

Cari \(MS-MVP\)
07-09-2005, 09:59 PM
Check for updated drivers..... and if no change, please ask in a Windows 98
newsgroup.... this is for WindowsXP.
--
Cari
(MS-MVP Printing & Imaging)

"editor" <abbas@hussainicalgary.com> wrote in message
news:1116685805.273195.58540@g14g2000cwa.googlegroups.com...
> Hi,
>
> Hard Ware: Diamond Stealth S80
> O/S : Win98 SE
>
> Problem: DVI output works only if monitor resolution is set to 640x480!
> DVI output is very bad and it cuts monitor output from each edge. I
> cannot see the top, bottom, left, and right edge of the display.
>
> I installed the drivers that came with the card.
>
> Any advise is good advise.
>
> Thank you.
>
>


Stealth S80 DVI resolution