[Drwngflies]

I recently added a SATA HD, I now re-sized one volume down, and added
another(third) volume, and assigned a drive letter- H: to it. Now, the new H:
drive doesn't show in "My Computer", if I log on normally, however, it does
show if I log on as Admin. in "Safe Mode". I remember going to a window when
I first added the SATA, wher it gave me choices of availiable drive letter
assignment possibilities to choose from - ie: A:, B:, ... Z: , and as I
should have known better, i disabled those I wasn't using at that time. Now,
I need to use/enable the H: choice so Windows will recognize it as "current
user".
Can you help me re-trace my steps to return to this window, wher ei can
re-enable all the other drive letters? Thank You...

[Andrew E.]

Go to run,type:diskmgmt.msc In msc,L.click on the drive,actions,all,change
drive letter path/letter.

"Drwngflies" wrote:

> I recently added a SATA HD, I now re-sized one volume down, and added
> another(third) volume, and assigned a drive letter- H: to it. Now, the new H:
> drive doesn't show in "My Computer", if I log on normally, however, it does
> show if I log on as Admin. in "Safe Mode". I remember going to a window when
> I first added the SATA, wher it gave me choices of availiable drive letter
> assignment possibilities to choose from - ie: A:, B:, ... Z: , and as I
> should have known better, i disabled those I wasn't using at that time. Now,
> I need to use/enable the H: choice so Windows will recognize it as "current
> user".
> Can you help me re-trace my steps to return to this window, wher ei can
> re-enable all the other drive letters? Thank You...

[Drwngflies]

"Andrew E." wrote:

> Go to run,type:diskmgmt.msc In msc,L.click on the drive,actions,all,change
> drive letter path/letter.
>
> "Drwngflies" wrote:
>
> > I recently added a SATA HD, I now re-sized one volume down, and added
> > another(third) volume, and assigned a drive letter- H: to it. Now, the new H:
> > drive doesn't show in "My Computer", if I log on normally, however, it does
> > show if I log on as Admin. in "Safe Mode". I remember going to a window when
> > I first added the SATA, wher it gave me choices of availiable drive letter
> > assignment possibilities to choose from - ie: A:, B:, ... Z: , and as I
> > should have known better, i disabled those I wasn't using at that time. Now,
> > I need to use/enable the H: choice so Windows will recognize it as "current
> > user".
> > Can you help me re-trace my steps to return to this window, wher ei can
> > re-enable all the other drive letters? Thank You...

I already created the Volume, I already added a drive letter to the same
volume - H: , and it shows in device mngr, and it shows in disk mngmt, but it
doesnt show in My Computer, if I log in as current user, which I do have
admin status.
But, if I log in as Admin, in safe mode, it Will show in My Computer, as H:
drive.
So, what am I missing? Is there something to change in Current User special
priviledges? Or something similar?

[Drwngflies]

"Drwngflies" wrote:

>
>
> "Andrew E." wrote:
>
> > Go to run,type:diskmgmt.msc In msc,L.click on the drive,actions,all,change
> > drive letter path/letter.
> >
> > "Drwngflies" wrote:
> >
> > > I recently added a SATA HD, I now re-sized one volume down, and added
> > > another(third) volume, and assigned a drive letter- H: to it. Now, the new H:
> > > drive doesn't show in "My Computer", if I log on normally, however, it does
> > > show if I log on as Admin. in "Safe Mode". I remember going to a window when
> > > I first added the SATA, wher it gave me choices of availiable drive letter
> > > assignment possibilities to choose from - ie: A:, B:, ... Z: , and as I
> > > should have known better, i disabled those I wasn't using at that time. Now,
> > > I need to use/enable the H: choice so Windows will recognize it as "current
> > > user".
> > > Can you help me re-trace my steps to return to this window, wher ei can
> > > re-enable all the other drive letters? Thank You...
>
> I already created the Volume, I already added a drive letter to the same
> volume - H: , and it shows in device mngr, and it shows in disk mngmt, but it
> doesnt show in My Computer, if I log in as current user, which I do have
> admin status.
> But, if I log in as Admin, in safe mode, it Will show in My Computer, as H:
> drive.
> So, what am I missing? Is there something to change in Current User special
> priviledges? Or something similar?
Screen Shot of both admin and user(John) in safe mode... I aint totally
crazy. Am I?
http://i3.photobucket.com/albums/y99/drwngflies/SSHJohnSafe.jpg
http://i3.photobucket.com/albums/y99/drwngflies/SSHAdminSafe.jpg

[Drwngflies]

> >
> > I already created the Volume, I already added a drive letter to the same
> > volume - H: , and it shows in device mngr, and it shows in disk mngmt, but it
> > doesnt show in My Computer, if I log in as current user, which I do have
> > admin status.
> > But, if I log in as Admin, in safe mode, it Will show in My Computer, as H:
> > drive.
> > So, what am I missing? Is there something to change in Current User special
> > priviledges? Or something similar?
> Screen Shot of both admin and user(John) in safe mode... I aint totally
> crazy. Am I?
> http://i3.photobucket.com/albums/y99/drwngflies/SSHJohnSafe.jpg
> http://i3.photobucket.com/albums/y99/drwngflies/SSHAdminSafe.jpg

--------
I cannot for the life of me, remember using TweakUI program before, but,
evidently, i did...for now, i am up and running with all drives listed..
I thought I was losing my mind.
Thnx 2 all those who kept me from giving up.
http://i3.photobucket.com/albums/y99/drwngflies/FoundProb.jpg