Post SYSPREP Setup Error



Bob
07-10-2005, 02:16 AM
Hi

I am trying to reboot after running SYSPREP.
I get an error indicating that the instruction at 0x5F1A340B is trying to
read memory at 0x00000014 but is failing.
It occurs at the screen prompting for a computer name and administrator
password.

I am using XP-PRO slipstreamed with SP2.

I want to manually enter a computername on reboot, but automate everything
else.

Any suggestions on what the SYSPREP.INF should contain?

Michael Niehaus [MS]
07-10-2005, 02:16 AM
As you can probably guess, this is not normal. I can't think of anything
you could put into Sysprep.inf that would cause this. Are you specifying
commands to be executed via CMDLINES.TXT? If so, one of those could be
causing issues.

-Michael Niehaus
Senior Consultant
MCS US Centers of Excellence - Deployment AOS
mniehaus@microsoft.com
This posting is provided "AS IS" with no warranties, and confers no rights.

"Bob" <someone@microsoft.com> wrote in message
news:ubvesx0WFHA.2448@TK2MSFTNGP10.phx.gbl...
> Hi
>
> I am trying to reboot after running SYSPREP.
> I get an error indicating that the instruction at 0x5F1A340B is trying to
> read memory at 0x00000014 but is failing.
> It occurs at the screen prompting for a computer name and administrator
> password.
>
> I am using XP-PRO slipstreamed with SP2.
>
> I want to manually enter a computername on reboot, but automate everything
> else.
>
> Any suggestions on what the SYSPREP.INF should contain?
>

Bob
07-10-2005, 02:16 AM
Hi Michael,
There is no CMDLINES.TXT, so that can't be causing the problem

Cheers

Bob

"Michael Niehaus [MS]" <mniehaus@online.microsoft.com> wrote in message
news:ueRVfr1WFHA.796@TK2MSFTNGP09.phx.gbl...
> As you can probably guess, this is not normal. I can't think of anything
> you could put into Sysprep.inf that would cause this. Are you specifying
> commands to be executed via CMDLINES.TXT? If so, one of those could be
> causing issues.
>
> -Michael Niehaus
> Senior Consultant
> MCS US Centers of Excellence - Deployment AOS
> mniehaus@microsoft.com
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>
> "Bob" <someone@microsoft.com> wrote in message
> news:ubvesx0WFHA.2448@TK2MSFTNGP10.phx.gbl...
>> Hi
>>
>> I am trying to reboot after running SYSPREP.
>> I get an error indicating that the instruction at 0x5F1A340B is trying to
>> read memory at 0x00000014 but is failing.
>> It occurs at the screen prompting for a computer name and administrator
>> password.
>>
>> I am using XP-PRO slipstreamed with SP2.
>>
>> I want to manually enter a computername on reboot, but automate
>> everything else.
>>
>> Any suggestions on what the SYSPREP.INF should contain?
>>
>
>

Michael Niehaus [MS]
07-10-2005, 02:16 AM
There have been a few similar errors reported to Microsoft Product Support,
but all were tracked down to corrupt images or Windows source files;
rebuilding the image always fixed the problem. I would recommend contacting
Support as they would be better able to troubleshoot this problem.

-Michael Niehaus
Senior Consultant
MCS US Centers of Excellence - Deployment AOS
mniehaus@microsoft.com
This posting is provided "AS IS" with no warranties, and confers no rights.

"Bob" <someone@microsoft.com> wrote in message
news:ORhTre2WFHA.2348@TK2MSFTNGP14.phx.gbl...
> Hi Michael,
> There is no CMDLINES.TXT, so that can't be causing the problem
>
> Cheers
>
> Bob
>
> "Michael Niehaus [MS]" <mniehaus@online.microsoft.com> wrote in message
> news:ueRVfr1WFHA.796@TK2MSFTNGP09.phx.gbl...
>> As you can probably guess, this is not normal. I can't think of anything
>> you could put into Sysprep.inf that would cause this. Are you specifying
>> commands to be executed via CMDLINES.TXT? If so, one of those could be
>> causing issues.
>>
>> -Michael Niehaus
>> Senior Consultant
>> MCS US Centers of Excellence - Deployment AOS
>> mniehaus@microsoft.com
>> This posting is provided "AS IS" with no warranties, and confers no
>> rights.
>>
>> "Bob" <someone@microsoft.com> wrote in message
>> news:ubvesx0WFHA.2448@TK2MSFTNGP10.phx.gbl...
>>> Hi
>>>
>>> I am trying to reboot after running SYSPREP.
>>> I get an error indicating that the instruction at 0x5F1A340B is trying
>>> to read memory at 0x00000014 but is failing.
>>> It occurs at the screen prompting for a computer name and administrator
>>> password.
>>>
>>> I am using XP-PRO slipstreamed with SP2.
>>>
>>> I want to manually enter a computername on reboot, but automate
>>> everything else.
>>>
>>> Any suggestions on what the SYSPREP.INF should contain?
>>>
>>
>>
>
>

Bob
07-10-2005, 02:16 AM
Thanks Michael

"Michael Niehaus [MS]" <mniehaus@online.microsoft.com> wrote in message
news:urMCh57WFHA.3540@TK2MSFTNGP15.phx.gbl...
> There have been a few similar errors reported to Microsoft Product
> Support, but all were tracked down to corrupt images or Windows source
> files; rebuilding the image always fixed the problem. I would recommend
> contacting Support as they would be better able to troubleshoot this
> problem.
>
> -Michael Niehaus
> Senior Consultant
> MCS US Centers of Excellence - Deployment AOS
> mniehaus@microsoft.com
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>
> "Bob" <someone@microsoft.com> wrote in message
> news:ORhTre2WFHA.2348@TK2MSFTNGP14.phx.gbl...
>> Hi Michael,
>> There is no CMDLINES.TXT, so that can't be causing the problem
>>
>> Cheers
>>
>> Bob
>>
>> "Michael Niehaus [MS]" <mniehaus@online.microsoft.com> wrote in message
>> news:ueRVfr1WFHA.796@TK2MSFTNGP09.phx.gbl...
>>> As you can probably guess, this is not normal. I can't think of
>>> anything you could put into Sysprep.inf that would cause this. Are you
>>> specifying commands to be executed via CMDLINES.TXT? If so, one of
>>> those could be causing issues.
>>>
>>> -Michael Niehaus
>>> Senior Consultant
>>> MCS US Centers of Excellence - Deployment AOS
>>> mniehaus@microsoft.com
>>> This posting is provided "AS IS" with no warranties, and confers no
>>> rights.
>>>
>>> "Bob" <someone@microsoft.com> wrote in message
>>> news:ubvesx0WFHA.2448@TK2MSFTNGP10.phx.gbl...
>>>> Hi
>>>>
>>>> I am trying to reboot after running SYSPREP.
>>>> I get an error indicating that the instruction at 0x5F1A340B is trying
>>>> to read memory at 0x00000014 but is failing.
>>>> It occurs at the screen prompting for a computer name and administrator
>>>> password.
>>>>
>>>> I am using XP-PRO slipstreamed with SP2.
>>>>
>>>> I want to manually enter a computername on reboot, but automate
>>>> everything else.
>>>>
>>>> Any suggestions on what the SYSPREP.INF should contain?
>>>>
>>>
>>>
>>
>>
>
>


Post SYSPREP Setup Error