[Koshy John]

I created a SP2 CD by following the steps mentioned in the SP2 disc
deployment files. The disc was based on a HP Windows XP oem disc that came
with my laptop. The problem is I can't do clean installs from the SP2 disc as
I can't boot from it. I tried booting with the original SP1 disc and then
slipping in the SP2 disc at the first oppurtunity, but that didn't work.
Neither did booting using a floppy disk and running "[CD]:\I386\winnt" or
"[CD]:\I386\winnt32".

Is there any way to make a bootable SP2 disk? Or can I trade in my SP1 disc
for a SP2 disc at a nominal cost?

Thank You.
--
Koshy John

[Shenan Stanley]

Koshy John wrote:
> I created a SP2 CD by following the steps mentioned in the SP2 disc
> deployment files. The disc was based on a HP Windows XP oem disc that
> came with my laptop. The problem is I can't do clean installs from
> the SP2 disc as I can't boot from it. I tried booting with the
> original SP1 disc and then slipping in the SP2 disc at the first
> oppurtunity, but that didn't work. Neither did booting using a floppy
> disk and running "[CD]:\I386\winnt" or "[CD]:\I386\winnt32".
>
> Is there any way to make a bootable SP2 disk? Or can I trade in my
> SP1 disc for a SP2 disc at a nominal cost?

Find a copy of "AutoStreamer" on the web.
You need to MAKE the CD bootable when burning it. Barts Boot Image
Extractor can help with this if doing it manually.

--
Shenan Stanley
MS-MVP
--
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html