[hotema]

I have a problem with many of our xp pro machines. When browsing the network
in, "Microsoft Windows Network" I can only see the two domain controllers we
have. Something like below.

-Microsoft Windows Network
-domain
+PDC
+BDC

Win98 and Win2k doesn't seem to have this problem. Also, some XP machines
seems to list everything fine.

Work around... If I disable my nic and reenable it, then the problem goes
away. I am able to see all the PCs on the network. If I restart the PC then
it again does not show the entire network. Does anyone have any idea?

Thanks

[Robert L [MS-MVP]]

sounds like master browser issue. these pages may help,
troubleshooting computer browsing issues Can't see any or only some computers in My Network Places Master Browsing issue on Multihomed DC One computer screw up the network ...
www.chicagotech.net/computerbrowsingissues.htm



computer browser Can't see any or only some computers in My Network Places How to check Browser status The browser was unable to retrieve a list of servers from the browser ...
www.chicagotech.net/browser.htm


Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help.

"hotema" <hotema@discussions.microsoft.com> wrote in message news:90C33FBA-7779-413D-8F04-B3F24823EC87@microsoft.com...
I have a problem with many of our xp pro machines. When browsing the network
in, "Microsoft Windows Network" I can only see the two domain controllers we
have. Something like below.

-Microsoft Windows Network
-domain
+PDC
+BDC

Win98 and Win2k doesn't seem to have this problem. Also, some XP machines
seems to list everything fine.

Work around... If I disable my nic and reenable it, then the problem goes
away. I am able to see all the PCs on the network. If I restart the PC then
it again does not show the entire network. Does anyone have any idea?

Thanks

[Chuck]

On Sat, 25 Jun 2005 16:36:01 -0700, hotema <hotema@discussions.microsoft.com>
wrote:

>I have a problem with many of our xp pro machines. When browsing the network
>in, "Microsoft Windows Network" I can only see the two domain controllers we
>have. Something like below.
>
>-Microsoft Windows Network
> -domain
> +PDC
> +BDC
>
>Win98 and Win2k doesn't seem to have this problem. Also, some XP machines
>seems to list everything fine.
>
>Work around... If I disable my nic and reenable it, then the problem goes
>away. I am able to see all the PCs on the network. If I restart the PC then
>it again does not show the entire network. Does anyone have any idea?
>
>Thanks

This problem is typically caused by a browser conflict, or possibly by a
misconfigured or overlooked personal firewall.

Make sure you don't have a misconfigured or overlooked personal firewall.
<http://nitecruzr.blogspot.com/2005/05/your-personal-firewall-can-either-help.html>

Look for browser conflicts using browstat. Run "browstat status" from the
problem computer, both before and after the problem is experienced, and from 1
or 2 perfectly working computers. Compare the "browstat status" log from 3 or 4
test cases, and look for discrepancies, as outlined in this article:
<http://nitecruzr.blogspot.com/2005/05/browstat-utility-from-microsoft.html>

For more information about browser issues, read this longer article:
<http://nitecruzr.blogspot.com/2005/04/nt-browser-or-why-cant-i-always-see.html>

--
Cheers,
Chuck
http://nitecruzr.blogspot.com/
Paranoia is not a problem - it's a normal response from experience.
My email is AT DOT
actual address pchuck sonic net.

[hotema]

I found the solution to my problem thanks to both Robert L, and Chuck. In
case anyone has the same problem, I'll post my solution here. My PDC and BDC
are clustered. I disabled netbios over tcp/ip on the NIC that's used for the
cluster. Below is a recommendation from microsoft regarding cluster servers.

http://support.microsoft.com/?kbid=193890

Thanks!

"hotema" wrote:

> I have a problem with many of our xp pro machines. When browsing the network
> in, "Microsoft Windows Network" I can only see the two domain controllers we
> have. Something like below.
>
> -Microsoft Windows Network
> -domain
> +PDC
> +BDC
>
> Win98 and Win2k doesn't seem to have this problem. Also, some XP machines
> seems to list everything fine.
>
> Work around... If I disable my nic and reenable it, then the problem goes
> away. I am able to see all the PCs on the network. If I restart the PC then
> it again does not show the entire network. Does anyone have any idea?
>
> Thanks
>