Hi Graham
WMM captures it in .wmv format and yes, the audio is connected to the sound
card.
Thanks
Andres
"Graham Hughes" wrote:
> It is more than likely due to the way it is captured I'm afraid. What file
> type does MM produce when it is imported? DOes this play ok in say, wmp?
> I also assume the audio is connected to the sound card?
> --
> Graham Hughes
> MVP Digital Media
> www.myvideoproblems.co.uk
> www.dvds2treasure.com
> www.simplydv.com
>
>
> "Andres" <Andres@discussions.microsoft.com> wrote in message
> news:7C7B9B96-162E-43F5-9A00-0D2D47795001@microsoft.com...
> > Hi, I'm using a DVD EZMaker Gold video card. My video camera has no svideo
> > so
> > I connect audio out to my graphics card and video out to my video card.
> > Copying the video using WMM is fine whatever the size. Once copied I add a
> > title and then save to hard disk.This is when the problem starts and I get
> > the windows error or it just freezes. I saved a 6 meg test video with
> > titles
> > and which worked. The one I am trying is 71meg.
> >
> > Thanks, Andres
> >
> > "Graham Hughes" wrote:
> >
> >> Movie Maker does not work well with all analogue capture, unless you use
> >> a
> >> specific analogue to digital convertor, one which takes the analogue
> >> signal
> >> and oputputs it as digital via a firewire, or a pci analogue capture
> >> card.
> >> This is possibly your problem if you are trying to use the tv-in on a
> >> graphics card.
> >> List how you are trying to do it.
> >> Graham
> >>
> >> --
> >> Graham Hughes
> >> MVP Digital Media
> >> www.myvideoproblems.co.uk
> >> www.dvds2treasure.com
> >> www.simplydv.com
> >>
> >>
> >> "Andres" <Andres@discussions.microsoft.com> wrote in message
> >> news:A63B1D07-D67F-4D83-8BA0-6B782753527E@microsoft.com...
> >> > Hi Graham. Yes, you are correct. It is PAL. I only live here!
> >> > I changed the project to PAL then tried saving to my computer and this
> >> > time
> >> > it went a lot further (71%) but stopped. Tried again and same thing
> >> > except
> >> > 19% after reboot.
> >> > Is there a size restriction? I recaptured the same video and but only
> >> > 5meg
> >> > of it (original is 36meg) and it finished ok. Another video capture is
> >> > 70meg,
> >> > which also fails.
> >> > Trying to get my old family VHS onto DVD. It cant be a memory issue as
> >> > the
> >> > PC has 1GB and 80GB disk. Pc is a P4-3Gig. This is so frustrating and a
> >> > shame
> >> > as WMM looks good.
> >> >
> >> > Thanks
> >> > Andres
> >> >
> >> > "Graham Hughes" wrote:
> >> >
> >> >> If the cam is PAL you need your project in PAL, then output in PAL,
> >> >> and
> >> >> use
> >> >> a standards convertor to change it to NTSC. This is the expensive part
> >> >> as
> >> >> a
> >> >> good stds convertor costs a few hundred pounds. Did you not also take
> >> >> your
> >> >> pal tv etc with you?
> >> >> Anyway, doesn't Spain use PAL? I didn't think ther were any Euorpean
> >> >> countries that used NTSC, France uses Secam????
> >> >>
> >> >> --
> >> >> Graham Hughes
> >> >> MVP Digital Media
> >> >> www.myvideoproblems.co.uk
> >> >> www.dvds2treasure.com
> >> >> www.simplydv.com
> >> >>
> >> >>
> >> >> "Andres" <Andres@discussions.microsoft.com> wrote in message
> >> >> news:97C7870E-5C2A-479C-B69A-1BB1EF704B2D@microsoft.com...
> >> >> >I have a similar issue, but the other way around. I now live in Spain
> >> >> >(NTSC)
> >> >> > and my Camcorder is UK (PAL). Using output NTSC and video captures
> >> >> > ok.
> >> >> > Then I
> >> >> > set up a project to add just a jazzy title then save to my computer.
> >> >> > It
> >> >> > always gets so far (sometimes in the same place) then freezes. Tried
> >> >> > it
> >> >> > on
> >> >> > different videos and same thing. No error messages. I am quite new
> >> >> > to
> >> >> > WMM
> >> >> > so
> >> >> > any help would be appreciated.
> >> >> >
> >> >> > Thanks
> >> >> > Andres
> >> >> >
> >> >> > "Manuel Santos" wrote:
> >> >> >
> >> >> >> I'm considering using MM but it is not clear if I can burn to PAL
> >> >> >> format.
> >> >>
> >> >>
> >> >>
> >>
> >>
> >>
>
>
>