Fax Device



John Wright
07-09-2005, 10:30 PM
I have a fax/modem card with 8 devices in it, I am running windows 2003
server and I can see all eight devices in the server. I have configured
four of the devices in the device manager in the outgoing routing/group
section, and I have created a rule for this group. I just sent over three
faxes at the same time, but only one fax is going out at a time. I am
supposing that since I have configured 4 devices, that four faxes would go
out at the same time. I have eight lines connected to the device, so there
is not a line sharing conflict. What more do I need to do to get faxes to
send more than one at a time.

John Wright

Renu Bhattar [MSFT]
07-09-2005, 10:30 PM
Ideally, the devices configured to send are used if idle.Also, the number to
which you are sending the faxes to, should be different.

Can you write the details about the Outgoing Routing Groups and Rules?

---

Renu Bhattar [MSFT]

Microsoft Printing, Imaging and Faxing
This posting isprovided "AS IS" with no warranties and confers no rights.
Please do not send mail directly to this alias. This alias is for newsgroup
purposes only.

"John Wright" <rileyx_wright@hotmail.com> wrote in message
news:OB4iEtEbFHA.2996@TK2MSFTNGP10.phx.gbl...
>I have a fax/modem card with 8 devices in it, I am running windows 2003
>server and I can see all eight devices in the server. I have configured
>four of the devices in the device manager in the outgoing routing/group
>section, and I have created a rule for this group. I just sent over three
>faxes at the same time, but only one fax is going out at a time. I am
>supposing that since I have configured 4 devices, that four faxes would go
>out at the same time. I have eight lines connected to the device, so there
>is not a line sharing conflict. What more do I need to do to get faxes to
>send more than one at a time.
>
> John Wright
>


Fax Device