[AA Smith]

At present, the instructions found at Help in WinXP Pro SP2 read as follows:

To erase files from a CD rewritable disc: 1. Double-click the My Computer
icon on your desktop.
2. In My Computer, right-click the CD recording drive, and then click
Open. Windows displays a temporary storage area where files are held before
they are copied to the CD. Files or folders that are located in the
temporary storage area are listed in the Files Ready to Be Written to the CD
box.
3. In the CD Writing Tasks pane, click Erase this CD-RW. The Welcome
to the CD Writing Wizard dialog box is displayed. After you click Next, the
Erasing the CD dialog box is displayed and the progress bar displays the
progress of the process.
4. When the process is finished, you receive a message in the
notification area and you can use the CD-RW disc.Note: Not all CDs are
erasable. If the CD that you are using is not erasable, for example, then
this feature is not available.


However, when I carry out steps 1 & 2 above, no CD Writing Tasks pane is
present in the folder that's displayed. So, for now, I can't erase/format
the CD-RW.

One thing that has probably contributed to this is the fact that I did have
Nero's InCD installed on this computer until I found that it does a poor job
of formatting the CD-RW. When formatted/erased many months before I
installed InCD, WinXP Pro formatted this particular CD with a 650 mb maximum
capacity. However, InCD formatted it with a much smaller max. capacity;
specifically 540 mb. So, I uninstalled InCD & rebooted, but I can't figure
out how to format/erase this CD with WinXP Pro SP2.

So, I'd very much appreciate your help.
--
With kindest regards,

Dick Smith

[Richard Urban]

The amount of time you spent writing about your problem with one CD-RAW disk
is worth more that the 50-75 cents it would cost you to toss the disk.

Just my opinion!

--
Regards,

Richard Urban

aka Crusty (-: Old B@stard :-)

If you knew as much as you think you know,
You would realize that you don't know what you thought you knew!


"AA Smith" <SmithRMS@Comcast.net> wrote in message
news:OavxlzeaFHA.616@TK2MSFTNGP12.phx.gbl...
> At present, the instructions found at Help in WinXP Pro SP2 read as
> follows:
>
> To erase files from a CD rewritable disc: 1. Double-click the My Computer
> icon on your desktop.
> 2. In My Computer, right-click the CD recording drive, and then click
> Open. Windows displays a temporary storage area where files are held
> before they are copied to the CD. Files or folders that are located in the
> temporary storage area are listed in the Files Ready to Be Written to the
> CD box.
> 3. In the CD Writing Tasks pane, click Erase this CD-RW. The Welcome
> to the CD Writing Wizard dialog box is displayed. After you click Next,
> the Erasing the CD dialog box is displayed and the progress bar displays
> the progress of the process.
> 4. When the process is finished, you receive a message in the
> notification area and you can use the CD-RW disc.Note: Not all CDs are
> erasable. If the CD that you are using is not erasable, for example, then
> this feature is not available.
>
>
> However, when I carry out steps 1 & 2 above, no CD Writing Tasks pane is
> present in the folder that's displayed. So, for now, I can't
> erase/format the CD-RW.
>
> One thing that has probably contributed to this is the fact that I did
> have Nero's InCD installed on this computer until I found that it does a
> poor job of formatting the CD-RW. When formatted/erased many months
> before I installed InCD, WinXP Pro formatted this particular CD with a 650
> mb maximum capacity. However, InCD formatted it with a much smaller max.
> capacity; specifically 540 mb. So, I uninstalled InCD & rebooted, but I
> can't figure out how to format/erase this CD with WinXP Pro SP2.
>
> So, I'd very much appreciate your help.
> --
> With kindest regards,
>
> Dick Smith
>

[Jonybrv]

Tools menu, click Folder Options and make sure Show common tasks in folders
is selected.

I believe the options to erase CD-RW should be available in File menu too
and also when you right click CD-RW drive.

Also as you have just uninstalled inCD, right click CD-RW and select
Properties. Ensure Recording tab is visible there, if yes, enable recording
on the drive.

If no recording tab is listed for CD-RW drive, follow this:

http://support.microsoft.com/default.aspx?scid=kb;en-us;316529

--
Jonybrv


"AA Smith" wrote:

> At present, the instructions found at Help in WinXP Pro SP2 read as follows:
>
> To erase files from a CD rewritable disc: 1. Double-click the My Computer
> icon on your desktop.
> 2. In My Computer, right-click the CD recording drive, and then click
> Open. Windows displays a temporary storage area where files are held before
> they are copied to the CD. Files or folders that are located in the
> temporary storage area are listed in the Files Ready to Be Written to the CD
> box.
> 3. In the CD Writing Tasks pane, click Erase this CD-RW. The Welcome
> to the CD Writing Wizard dialog box is displayed. After you click Next, the
> Erasing the CD dialog box is displayed and the progress bar displays the
> progress of the process.
> 4. When the process is finished, you receive a message in the
> notification area and you can use the CD-RW disc.Note: Not all CDs are
> erasable. If the CD that you are using is not erasable, for example, then
> this feature is not available.
>
>
> However, when I carry out steps 1 & 2 above, no CD Writing Tasks pane is
> present in the folder that's displayed. So, for now, I can't erase/format
> the CD-RW.
>
> One thing that has probably contributed to this is the fact that I did have
> Nero's InCD installed on this computer until I found that it does a poor job
> of formatting the CD-RW. When formatted/erased many months before I
> installed InCD, WinXP Pro formatted this particular CD with a 650 mb maximum
> capacity. However, InCD formatted it with a much smaller max. capacity;
> specifically 540 mb. So, I uninstalled InCD & rebooted, but I can't figure
> out how to format/erase this CD with WinXP Pro SP2.
>
> So, I'd very much appreciate your help.
> --
> With kindest regards,
>
> Dick Smith
>
>
>

[Teoh Han Hui]

You should first use Nero or other burning software to erase the CD-RW, as
Windows will probably recognize an InCD formatted disc to be CD-ROM, thus
removing the feature to erase it. Alternatively, you may use InCD to erase
the CD-RW. By the way, InCD is not poor in formatting, it formats CD-RWs into
MRW format. This enables you to use your CD-RW the way you would use a floppy
disk, that means you can add/modify/delete files as you wish, anytime. The
sacrifice for this capability is the free space available on the CD-RW will
be around 505 MB only. Once the disk is erased, you would have the option to
burn it normally (like the way Windows XP does) or format it into InCD format
(for greater functionality, of course).
"AA Smith" wrote:

> At present, the instructions found at Help in WinXP Pro SP2 read as follows:
>
> To erase files from a CD rewritable disc: 1. Double-click the My Computer
> icon on your desktop.
> 2. In My Computer, right-click the CD recording drive, and then click
> Open. Windows displays a temporary storage area where files are held before
> they are copied to the CD. Files or folders that are located in the
> temporary storage area are listed in the Files Ready to Be Written to the CD
> box.
> 3. In the CD Writing Tasks pane, click Erase this CD-RW. The Welcome
> to the CD Writing Wizard dialog box is displayed. After you click Next, the
> Erasing the CD dialog box is displayed and the progress bar displays the
> progress of the process.
> 4. When the process is finished, you receive a message in the
> notification area and you can use the CD-RW disc.Note: Not all CDs are
> erasable. If the CD that you are using is not erasable, for example, then
> this feature is not available.
>
>
> However, when I carry out steps 1 & 2 above, no CD Writing Tasks pane is
> present in the folder that's displayed. So, for now, I can't erase/format
> the CD-RW.
>
> One thing that has probably contributed to this is the fact that I did have
> Nero's InCD installed on this computer until I found that it does a poor job
> of formatting the CD-RW. When formatted/erased many months before I
> installed InCD, WinXP Pro formatted this particular CD with a 650 mb maximum
> capacity. However, InCD formatted it with a much smaller max. capacity;
> specifically 540 mb. So, I uninstalled InCD & rebooted, but I can't figure
> out how to format/erase this CD with WinXP Pro SP2.
>
> So, I'd very much appreciate your help.
> --
> With kindest regards,
>
> Dick Smith
>
>
>

[Teoh Han Hui]

Yes..I overlooked it..InCD will automatically disable CD Recording of Windows
XP..So, to enable it, just right click on your drive icon, click Properties,
go to the Recording tab, then check the box "Enable CD recording on this
drive", click OK. You're done! Now just double-click on the drive icon, then
click on "Erase this CD-RW" on the left panel, click Next, then the CD-RW
will be erased (quick erase).

"Teoh Han Hui" wrote:

> You should first use Nero or other burning software to erase the CD-RW, as
> Windows will probably recognize an InCD formatted disc to be CD-ROM, thus
> removing the feature to erase it. Alternatively, you may use InCD to erase
> the CD-RW. By the way, InCD is not poor in formatting, it formats CD-RWs into
> MRW format. This enables you to use your CD-RW the way you would use a floppy
> disk, that means you can add/modify/delete files as you wish, anytime. The
> sacrifice for this capability is the free space available on the CD-RW will
> be around 505 MB only. Once the disk is erased, you would have the option to
> burn it normally (like the way Windows XP does) or format it into InCD format
> (for greater functionality, of course).
> "AA Smith" wrote:
>
> > At present, the instructions found at Help in WinXP Pro SP2 read as follows:
> >
> > To erase files from a CD rewritable disc: 1. Double-click the My Computer
> > icon on your desktop.
> > 2. In My Computer, right-click the CD recording drive, and then click
> > Open. Windows displays a temporary storage area where files are held before
> > they are copied to the CD. Files or folders that are located in the
> > temporary storage area are listed in the Files Ready to Be Written to the CD
> > box.
> > 3. In the CD Writing Tasks pane, click Erase this CD-RW. The Welcome
> > to the CD Writing Wizard dialog box is displayed. After you click Next, the
> > Erasing the CD dialog box is displayed and the progress bar displays the
> > progress of the process.
> > 4. When the process is finished, you receive a message in the
> > notification area and you can use the CD-RW disc.Note: Not all CDs are
> > erasable. If the CD that you are using is not erasable, for example, then
> > this feature is not available.
> >
> >
> > However, when I carry out steps 1 & 2 above, no CD Writing Tasks pane is
> > present in the folder that's displayed. So, for now, I can't erase/format
> > the CD-RW.
> >
> > One thing that has probably contributed to this is the fact that I did have
> > Nero's InCD installed on this computer until I found that it does a poor job
> > of formatting the CD-RW. When formatted/erased many months before I
> > installed InCD, WinXP Pro formatted this particular CD with a 650 mb maximum
> > capacity. However, InCD formatted it with a much smaller max. capacity;
> > specifically 540 mb. So, I uninstalled InCD & rebooted, but I can't figure
> > out how to format/erase this CD with WinXP Pro SP2.
> >
> > So, I'd very much appreciate your help.
> > --
> > With kindest regards,
> >
> > Dick Smith
> >
> >
> >

[kurttrail]

AA Smith wrote:
> At present, the instructions found at Help in WinXP Pro SP2 read as
> follows:
> To erase files from a CD rewritable disc: 1. Double-click the My
> Computer icon on your desktop.
> 2. In My Computer, right-click the CD recording drive, and then
> click Open. Windows displays a temporary storage area where files are
> held before they are copied to the CD. Files or folders that are
> located in the temporary storage area are listed in the Files Ready
> to Be Written to the CD box.
> 3. In the CD Writing Tasks pane, click Erase this CD-RW. The
> Welcome to the CD Writing Wizard dialog box is displayed. After you
> click Next, the Erasing the CD dialog box is displayed and the
> progress bar displays the progress of the process.
> 4. When the process is finished, you receive a message in the
> notification area and you can use the CD-RW disc.Note: Not all CDs are
> erasable. If the CD that you are using is not erasable, for example,
> then this feature is not available.
>
>
> However, when I carry out steps 1 & 2 above, no CD Writing Tasks pane
> is present in the folder that's displayed. So, for now, I can't
> erase/format the CD-RW.
>
> One thing that has probably contributed to this is the fact that I
> did have Nero's InCD installed on this computer until I found that it
> does a poor job of formatting the CD-RW. When formatted/erased many
> months before I installed InCD, WinXP Pro formatted this particular
> CD with a 650 mb maximum capacity. However, InCD formatted it with a
> much smaller max. capacity; specifically 540 mb. So, I uninstalled
> InCD & rebooted, but I can't figure out how to format/erase this CD
> with WinXP Pro SP2.
> So, I'd very much appreciate your help.

LOL! There is so much you don't know about CD burning that I wouldn't
know where to begin. You really need to do some reading on the subject.

http://www.google.com/search?sourceid=navclient&ie=UTF-8&rls=GGLG,GGLG:2005-21,GGLG:en&q=cdr

--
Peace!
Kurt
Self-anointed Moderator
microscum.pubic.windowsexp.gonorrhea
http://microscum.com/mscommunity
"Trustworthy Computing" is only another example of an Oxymoron!
"Produkt-Aktivierung macht frei"

[AA Smith]

Thanks a million, Jonybrv!

The problem was that the check-box on the Recording tab to "Enable recording
on this CD" was unchecked. Undoubtedly, a change instituted by Nero InCD
that it did not return to the proper state during uninstallation,

I really appreciate your help.
--
With kindest regards,

Dick Smith

"Jonybrv" <Jonybrv@discussions.microsoft.com> wrote in message
news:85FAA9E7-91BC-473B-AFDA-A6EC9E7EFCAF@microsoft.com...
> Tools menu, click Folder Options and make sure Show common tasks in
> folders
> is selected.
>
> I believe the options to erase CD-RW should be available in File menu too
> and also when you right click CD-RW drive.
>
> Also as you have just uninstalled inCD, right click CD-RW and select
> Properties. Ensure Recording tab is visible there, if yes, enable
> recording
> on the drive.
>
> If no recording tab is listed for CD-RW drive, follow this:
>
> http://support.microsoft.com/default.aspx?scid=kb;en-us;316529
>
> --
> Jonybrv
>
>
> "AA Smith" wrote:
>
>> At present, the instructions found at Help in WinXP Pro SP2 read as
>> follows:
>>
>> To erase files from a CD rewritable disc: 1. Double-click the My Computer
>> icon on your desktop.
>> 2. In My Computer, right-click the CD recording drive, and then
>> click
>> Open. Windows displays a temporary storage area where files are held
>> before
>> they are copied to the CD. Files or folders that are located in the
>> temporary storage area are listed in the Files Ready to Be Written to the
>> CD
>> box.
>> 3. In the CD Writing Tasks pane, click Erase this CD-RW. The
>> Welcome
>> to the CD Writing Wizard dialog box is displayed. After you click Next,
>> the
>> Erasing the CD dialog box is displayed and the progress bar displays the
>> progress of the process.
>> 4. When the process is finished, you receive a message in the
>> notification area and you can use the CD-RW disc.Note: Not all CDs are
>> erasable. If the CD that you are using is not erasable, for example, then
>> this feature is not available.
>>
>>
>> However, when I carry out steps 1 & 2 above, no CD Writing Tasks pane is
>> present in the folder that's displayed. So, for now, I can't
>> erase/format
>> the CD-RW.
>>
>> One thing that has probably contributed to this is the fact that I did
>> have
>> Nero's InCD installed on this computer until I found that it does a poor
>> job
>> of formatting the CD-RW. When formatted/erased many months before I
>> installed InCD, WinXP Pro formatted this particular CD with a 650 mb
>> maximum
>> capacity. However, InCD formatted it with a much smaller max. capacity;
>> specifically 540 mb. So, I uninstalled InCD & rebooted, but I can't
>> figure
>> out how to format/erase this CD with WinXP Pro SP2.
>>
>> So, I'd very much appreciate your help.
>> --
>> With kindest regards,
>>
>> Dick Smith
>>
>>
>>

[Jonybrv]

You are welcome.
--
Jonybrv


"AA Smith" wrote:

> Thanks a million, Jonybrv!
>
> The problem was that the check-box on the Recording tab to "Enable recording
> on this CD" was unchecked. Undoubtedly, a change instituted by Nero InCD
> that it did not return to the proper state during uninstallation,
>
> I really appreciate your help.
> --
> With kindest regards,
>
> Dick Smith
>
> "Jonybrv" <Jonybrv@discussions.microsoft.com> wrote in message
> news:85FAA9E7-91BC-473B-AFDA-A6EC9E7EFCAF@microsoft.com...
> > Tools menu, click Folder Options and make sure Show common tasks in
> > folders
> > is selected.
> >
> > I believe the options to erase CD-RW should be available in File menu too
> > and also when you right click CD-RW drive.
> >
> > Also as you have just uninstalled inCD, right click CD-RW and select
> > Properties. Ensure Recording tab is visible there, if yes, enable
> > recording
> > on the drive.
> >
> > If no recording tab is listed for CD-RW drive, follow this:
> >
> > http://support.microsoft.com/default.aspx?scid=kb;en-us;316529
> >
> > --
> > Jonybrv
> >
> >
> > "AA Smith" wrote:
> >
> >> At present, the instructions found at Help in WinXP Pro SP2 read as
> >> follows:
> >>
> >> To erase files from a CD rewritable disc: 1. Double-click the My Computer
> >> icon on your desktop.
> >> 2. In My Computer, right-click the CD recording drive, and then
> >> click
> >> Open. Windows displays a temporary storage area where files are held
> >> before
> >> they are copied to the CD. Files or folders that are located in the
> >> temporary storage area are listed in the Files Ready to Be Written to the
> >> CD
> >> box.
> >> 3. In the CD Writing Tasks pane, click Erase this CD-RW. The
> >> Welcome
> >> to the CD Writing Wizard dialog box is displayed. After you click Next,
> >> the
> >> Erasing the CD dialog box is displayed and the progress bar displays the
> >> progress of the process.
> >> 4. When the process is finished, you receive a message in the
> >> notification area and you can use the CD-RW disc.Note: Not all CDs are
> >> erasable. If the CD that you are using is not erasable, for example, then
> >> this feature is not available.
> >>
> >>
> >> However, when I carry out steps 1 & 2 above, no CD Writing Tasks pane is
> >> present in the folder that's displayed. So, for now, I can't
> >> erase/format
> >> the CD-RW.
> >>
> >> One thing that has probably contributed to this is the fact that I did
> >> have
> >> Nero's InCD installed on this computer until I found that it does a poor
> >> job
> >> of formatting the CD-RW. When formatted/erased many months before I
> >> installed InCD, WinXP Pro formatted this particular CD with a 650 mb
> >> maximum
> >> capacity. However, InCD formatted it with a much smaller max. capacity;
> >> specifically 540 mb. So, I uninstalled InCD & rebooted, but I can't
> >> figure
> >> out how to format/erase this CD with WinXP Pro SP2.
> >>
> >> So, I'd very much appreciate your help.
> >> --
> >> With kindest regards,
> >>
> >> Dick Smith
> >>
> >>
> >>
>
>
>