[Hussain]

HI All,

I have been using XP Embedded with SP1 from the past 6 months. I did not
face any problems in that.

Last week i have added SP2 as per the guidelines. Today i have built the
image with same components which i have used in SP1. I have upgraded to SP2.
After building the image, i have got 0x0000007B error. After adding SP2 only
i am getting this error.

Please advice me on this regards. Help needed.

Regards
Prem

[Martin Grossen, eMVP [AVNET Silica]]

The 0x7B stop means there is a bad or missing driver during start-up.
"Missing Critical Boot Device"
That will mean that the FBA processing will not have started yet and there
isn't
going to be an fbalog.txt file to look at.

Check your Device Driver for the Boot Device (SATA, SCSI, ....)
and recompile.

Here two way to find the problem:

- Find "CriticalDeviceDatabase" registry in System Hive.

- Try and get kernel mode debug output on a serial port and see what that
leads to.
There are some articles in the MSDN docs on how to do it.

--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

"Hussain" <Hussain@discussions.microsoft.com> schrieb im Newsbeitrag
news:C7A9F030-3F5E-4F23-A5DB-C1A1C6EC3F83@microsoft.com...
> HI All,
>
> I have been using XP Embedded with SP1 from the past 6 months. I did not
> face any problems in that.
>
> Last week i have added SP2 as per the guidelines. Today i have built the
> image with same components which i have used in SP1. I have upgraded to
> SP2.
> After building the image, i have got 0x0000007B error. After adding SP2
> only
> i am getting this error.
>
> Please advice me on this regards. Help needed.
>
> Regards
> Prem
>
>

[GL]

Hussain,
I will be migrating from SP1 to SP2 do you have a direct link for this
procedure? I'm a kind of worry of having dificulties like yours. But I thnk I
should do it.

Thanks
GL

"Hussain" wrote:

> HI All,
>
> I have been using XP Embedded with SP1 from the past 6 months. I did not
> face any problems in that.
>
> Last week i have added SP2 as per the guidelines. Today i have built the
> image with same components which i have used in SP1. I have upgraded to SP2.
> After building the image, i have got 0x0000007B error. After adding SP2 only
> i am getting this error.
>
> Please advice me on this regards. Help needed.
>
> Regards
> Prem
>
>

[Hussain]

GL,
U can easily do that.
Just click on the componenets in the target designer and click UPGRADE. Buy
doing that ur entire componets will be upgraded to SP2

Regards
Hussain

"GL" wrote:

> Hussain,
> I will be migrating from SP1 to SP2 do you have a direct link for this
> procedure? I'm a kind of worry of having dificulties like yours. But I thnk I
> should do it.
>
> Thanks
> GL
>
> "Hussain" wrote:
>
> > HI All,
> >
> > I have been using XP Embedded with SP1 from the past 6 months. I did not
> > face any problems in that.
> >
> > Last week i have added SP2 as per the guidelines. Today i have built the
> > image with same components which i have used in SP1. I have upgraded to SP2.
> > After building the image, i have got 0x0000007B error. After adding SP2 only
> > i am getting this error.
> >
> > Please advice me on this regards. Help needed.
> >
> > Regards
> > Prem
> >
> >

[GL]

Hussain,
But I think I should download something for this right?

I have Xpe SP1 in my TD database; I believe I should download something
from MS that contains all the SP2 Udated components; or I'm wrong?
Thanks

GL.

"Hussain" wrote:

> GL,
> U can easily do that.
> Just click on the componenets in the target designer and click UPGRADE. Buy
> doing that ur entire componets will be upgraded to SP2
>
> Regards
> Hussain
>
> "GL" wrote:
>
> > Hussain,
> > I will be migrating from SP1 to SP2 do you have a direct link for this
> > procedure? I'm a kind of worry of having dificulties like yours. But I thnk I
> > should do it.
> >
> > Thanks
> > GL
> >
> > "Hussain" wrote:
> >
> > > HI All,
> > >
> > > I have been using XP Embedded with SP1 from the past 6 months. I did not
> > > face any problems in that.
> > >
> > > Last week i have added SP2 as per the guidelines. Today i have built the
> > > image with same components which i have used in SP1. I have upgraded to SP2.
> > > After building the image, i have got 0x0000007B error. After adding SP2 only
> > > i am getting this error.
> > >
> > > Please advice me on this regards. Help needed.
> > >
> > > Regards
> > > Prem
> > >
> > >

[Martin Grossen, eMVP [AVNET Silica]]

Hi GL

You need to download the SP2 update.
If you have the Eval-version, downlaod it from the
public MS embedded website.
www.msdn.microsoft.com/embedded

or for the full version, visit the secure OEM site with
your OEM CLA agreement number:

https://embeddedoem.com


--

Martin Grossen, eMVP

AVNET EMG Silica
Franchise Manager Microsoft Embedded Europe

Your competent partner for Microsoft Embedded licencing

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

"GL" <GL@discussions.microsoft.com> schrieb im Newsbeitrag
news:7615573D-0301-4D52-B79B-C65F0F63D2C1@microsoft.com...
> Hussain,
> But I think I should download something for this right?
>
> I have Xpe SP1 in my TD database; I believe I should download something
> from MS that contains all the SP2 Udated components; or I'm wrong?
> Thanks
>
> GL.
>
> "Hussain" wrote:
>
>> GL,
>> U can easily do that.
>> Just click on the componenets in the target designer and click UPGRADE.
>> Buy
>> doing that ur entire componets will be upgraded to SP2
>>
>> Regards
>> Hussain
>>
>> "GL" wrote:
>>
>> > Hussain,
>> > I will be migrating from SP1 to SP2 do you have a direct link for
>> > this
>> > procedure? I'm a kind of worry of having dificulties like yours. But I
>> > thnk I
>> > should do it.
>> >
>> > Thanks
>> > GL
>> >
>> > "Hussain" wrote:
>> >
>> > > HI All,
>> > >
>> > > I have been using XP Embedded with SP1 from the past 6 months. I did
>> > > not
>> > > face any problems in that.
>> > >
>> > > Last week i have added SP2 as per the guidelines. Today i have built
>> > > the
>> > > image with same components which i have used in SP1. I have upgraded
>> > > to SP2.
>> > > After building the image, i have got 0x0000007B error. After adding
>> > > SP2 only
>> > > i am getting this error.
>> > >
>> > > Please advice me on this regards. Help needed.
>> > >
>> > > Regards
>> > > Prem
>> > >
>> > >