[mbayern@gmail.com]

OK, I've got an OEM agreement in place with MS, and I've received the
envelopes with the little stickers.

However I'm missing some information on how to use the stickers. Where
do I enter the PID? In Target Designer? If so where? Will the XPE
system ask for it during the FBA? If so how do I enable it?

Answers, hints, URL's to info ... anything could help.

Thanks,

Mark

[Brad Combs]

Hi Mark,

In Target Designer click "Settings" in the main configuration pane. In the
right hand details pane click "Show" under "Run-time Image Licensing" place
your pid in the textbox in the xxxxx-xxxxx-xxxxx-xxxxx-xxxxx format.

HTH,
Brad

<mbayern@gmail.com> wrote in message
news:1119277573.830635.232130@g49g2000cwa.googlegroups.com...
> OK, I've got an OEM agreement in place with MS, and I've received the
> envelopes with the little stickers.
>
> However I'm missing some information on how to use the stickers. Where
> do I enter the PID? In Target Designer? If so where? Will the XPE
> system ask for it during the FBA? If so how do I enable it?
>
> Answers, hints, URL's to info ... anything could help.
>
> Thanks,
>
> Mark
>

[Doug Gordon]

And, yes, if you set up your targets by cloning from a master (as most
everyone does), then you are basically putting the same license number on
all of your targets. But this is apparently OK, as it's the presence of the
sticker somewhere on the target device that actually makes it "legal."

Doug G

"Brad Combs" <brad@no.spam.imagotechnologies.nospam.com> wrote in message
news:OQLVDWadFHA.2664@TK2MSFTNGP15.phx.gbl...
> Hi Mark,
>
> In Target Designer click "Settings" in the main configuration pane. In the
> right hand details pane click "Show" under "Run-time Image Licensing"
> place your pid in the textbox in the xxxxx-xxxxx-xxxxx-xxxxx-xxxxx format.
>
> HTH,
> Brad
>
> <mbayern@gmail.com> wrote in message
> news:1119277573.830635.232130@g49g2000cwa.googlegroups.com...
>> OK, I've got an OEM agreement in place with MS, and I've received the
>> envelopes with the little stickers.
>>
>> However I'm missing some information on how to use the stickers. Where
>> do I enter the PID? In Target Designer? If so where? Will the XPE
>> system ask for it during the FBA? If so how do I enable it?
>>
>> Answers, hints, URL's to info ... anything could help.
>>
>> Thanks,
>>
>> Mark
>>
>
>