[Larry Waibel]

I had an SP1 configuration working just fine that allowed me to map a drive
letter from my network to the target system. In upgrading to SP2 I had to
pare the system back and change the core networking to not include Windows
Firewall, etc. Now I get a First I found that it lost the computer name so I
put that back in a 'System error 67...The network name cannot be found' when
I try to 'net use' to the target. First I found that the computer name had
been lost from the TD so I put that back in. But it still doesn't work. I
can do a 'net use' from the target to my desktop and map a drive letter that
way but not vice versa. I have the 'TCP/IP Networking with File Sharing and
Client for MS Networks' component. I can't figure out what I'm missing; any
ideas?

[Larry Waibel]

More information: If I do a 'net share' on the target, it says "The server
service is not started.' When I say 'y' to start it, I get 'System error
126...The specified module cannot be found'.

[Slobodan Brcin \(eMVP\)]

Larry,

I have not gone too much deep in SP2 yet :-(
But have you tried backing this project and resolving all dependencies again (including FW), just to see if it work.
In case that it work then you should use filemon to check whenther you need some dll file (component) in case that you have them all
then there is some registry setting that need to be present.

Regards,
Slobodan


"Larry Waibel" <lwaibel@no-spam-cox.net> wrote in message news:VA.000002a0.001ea132@no-spam-cox.net...
> More information: If I do a 'net share' on the target, it says "The server
> service is not started.' When I say 'y' to start it, I get 'System error
> 126...The specified module cannot be found'.
>

[Larry Waibel]

I guess I can try something like that but it's a pain and time-consuming when I already had
something working. I can tell you that this SP2 upgrade is the worst upgrade of anything
I've ever run into, including lots of applications and OS upgrades. The idea of an upgrade
should be to keep things that were working still working and make new features available
when wanted.

And if putting everything in (including FW) does work then I'm still not sure what I would
filemon since this appears to be some kind of service file that's not there. Maybe I can
try monitoring 'net share' on my regular XP system and see if I can discover anything that
way.

In article <O0QYj4LcFHA.3844@tk2msftngp13.phx.gbl>, Slobodan Brcin (eMVP) wrote:
> From: "Slobodan Brcin \(eMVP\)" <sbrcin@ptt.yu>
> Subject: Re: SP2 and net sharing
> Date: Tue, 14 Jun 2005 10:48:57 +0200
> Newsgroups: microsoft.public.windowsxp.embedded
>
> Larry,
>
> I have not gone too much deep in SP2 yet :-(
> But have you tried backing this project and resolving all dependencies again (including
FW), just to see if it work.
> In case that it work then you should use filemon to check whenther you need some dll file
(component) in case that you have them all
> then there is some registry setting that need to be present.
>
> Regards,
> Slobodan
>
> "Larry Waibel" <lwaibel@no-spam-cox.net> wrote in message
news:VA.000002a0.001ea132@no-spam-cox.net...
> > More information: If I do a 'net share' on the target, it says "The server
> > service is not started.' When I say 'y' to start it, I get 'System error
> > 126...The specified module cannot be found'.
> >
>

[KM]

Larry,

I am just wondering if you have "Credential Management User Interface"
component included in your configuration?

KM

> More information: If I do a 'net share' on the target, it says "The
> server
> service is not started.' When I say 'y' to start it, I get 'System error
> 126...The specified module cannot be found'.
>

[Larry Waibel]

Yes, I do have that.

In article <OKzK8sXcFHA.1040@TK2MSFTNGP10.phx.gbl>, Km wrote:
> From: "KM" <konstmor@nospam_yahoo.com>
> Subject: Re: SP2 and net sharing
> Date: Wed, 15 Jun 2005 00:24:18 -0700
> Newsgroups: microsoft.public.windowsxp.embedded
>
> Larry,
>
> I am just wondering if you have "Credential Management User Interface"
> component included in your configuration?
>
> KM
>
> > More information: If I do a 'net share' on the target, it says "The
> > server
> > service is not started.' When I say 'y' to start it, I get 'System error
> > 126...The specified module cannot be found'.
> >
>