Target Designer take hours for Depency Check or Build



XPEApplicator@BE
07-09-2005, 09:26 PM
Hi,
maybe one of you can help me. I'm just up to make a new image. When running
a Depency Check or Build it takes horrible much time - for the moment I'm
waitung since four hours for the completion of the depency check.
In paste it didn't so much time (maybe 10min for DepCheck and 30mins for
Build), so I don't believe in a hardware problem.

What could be wrong that TD suddenly take so much multiple time? Could
components in the image cause this problem (languages or so). OK, 1800 comps.
are many, but may this take over 4 hours???

Thanks for any help and best regards
XPe Applicator@BE

Gordon Smith \(eMVP\)
07-09-2005, 09:26 PM
XPEApplicator@BE wrote:
> Hi,
> maybe one of you can help me. I'm just up to make a new image. When
> running a Depency Check or Build it takes horrible much time - for
> the moment I'm waitung since four hours for the completion of the
> depency check.
> In paste it didn't so much time (maybe 10min for DepCheck and 30mins
> for Build), so I don't believe in a hardware problem.
>
> What could be wrong that TD suddenly take so much multiple time? Could
> components in the image cause this problem (languages or so). OK,
> 1800 comps. are many, but may this take over 4 hours???
>
> Thanks for any help and best regards
> XPe Applicator@BE

The only time I've had a build take that long is when I included a lot of
MUI components. I was told it was a fluke, but it still took the many hours
to build (~12 hours). Every other project I've worked on has been more in
the 10-20 minute range.

--
Gordon Smith (eMVP)
-- Avnet Applied Computing Solutions


Target Designer take hours for Depency Check or Build