XP Security Centre



Twanny
07-09-2005, 11:30 PM
"Once upon a time . . . when Windows Secuirty Centre opened, there used to be
3 icons (right under Manage Security Settings for: Internet Options,
Automatic Updates & Windows Firewall).
Now the Brickwall Icon for the Firewall is missing, although at the top the
Icon is visible and the setting is "ON". I hate it when something does not
work as it should.
Anyone encountered a similar event?
--
Rgds
"Twanny"

kurttrail
07-09-2005, 11:30 PM
Twanny wrote:
> "Once upon a time . . . when Windows Secuirty Centre opened, there
> used to be 3 icons (right under Manage Security Settings for:
> Internet Options, Automatic Updates & Windows Firewall).
> Now the Brickwall Icon for the Firewall is missing, although at the
> top the Icon is visible and the setting is "ON". I hate it when
> something does not work as it should.
> Anyone encountered a similar event?

Yes, I've often encountered people that are totally anal.

--
Peace!
Kurt
Self-anointed Moderator
microscum.pubic.windowsexp.gonorrhea
http://microscum.com/mscommunity
"Trustworthy Computing" is only another example of an Oxymoron!
"Produkt-Aktivierung macht frei"

S.Sengupta
07-09-2005, 11:30 PM
Try System Restore.

regards,
ssg MS-MVP

Twanny wrote:

> "Once upon a time . . . when Windows Secuirty Centre opened, there used to be
> 3 icons (right under Manage Security Settings for: Internet Options,
> Automatic Updates & Windows Firewall).
> Now the Brickwall Icon for the Firewall is missing, although at the top the
> Icon is visible and the setting is "ON". I hate it when something does not
> work as it should.
> Anyone encountered a similar event?

Twanny
07-09-2005, 11:30 PM
Thanks for replying so quickly.
Done that - no go. I might mention that NAV2005 is also running (was too
when everything was OK). Do you think there might be a tweak for this in the
Registry that was somehow overwritten?


"S.Sengupta" wrote:

>
> Try System Restore.
>
> regards,
> ssg MS-MVP
>
> Twanny wrote:
>
> > "Once upon a time . . . when Windows Secuirty Centre opened, there used to be
> > 3 icons (right under Manage Security Settings for: Internet Options,
> > Automatic Updates & Windows Firewall).
> > Now the Brickwall Icon for the Firewall is missing, although at the top the
> > Icon is visible and the setting is "ON". I hate it when something does not
> > work as it should.
> > Anyone encountered a similar event?
>

Ramesh, MS-MVP
07-09-2005, 11:30 PM
Twanny,

Did you use Tweak UI and hide the firewall.cpl entry from Control Panel? If
that's the case, the Windows Firewall would be missing from Control Panel
_AND_ in the Security Center UI. If that's the case, you need to undo what
you did using Tweak UI. If that does not help, see here for another
possibility.

Restore missing icons to the Windows Security Center:
http://windowsxp.mvps.org/seccentericons.htm

--
Ramesh, Microsoft MVP
Windows XP Shell/User
http://windowsxp.mvps.org


"Twanny" <Evenstar@Fastweb.net> wrote in message
news:7FE87873-4811-4AAF-ABD9-F6C75A8FCC57@microsoft.com...
> "Once upon a time . . . when Windows Secuirty Centre opened, there used to
> be
> 3 icons (right under Manage Security Settings for: Internet Options,
> Automatic Updates & Windows Firewall).
> Now the Brickwall Icon for the Firewall is missing, although at the top
> the
> Icon is visible and the setting is "ON". I hate it when something does not
> work as it should.
> Anyone encountered a similar event?
> --
> Rgds
> "Twanny"

Twanny
07-09-2005, 11:30 PM
Yes Ramesh, I did install Tweak UI recently - I will check there and also
check the site you indicated.
Thanks for now: I will advise later
-----------
Twanny

"Ramesh, MS-MVP" wrote:

> Twanny,
>
> Did you use Tweak UI and hide the firewall.cpl entry from Control Panel? If
> that's the case, the Windows Firewall would be missing from Control Panel
> _AND_ in the Security Center UI. If that's the case, you need to undo what
> you did using Tweak UI. If that does not help, see here for another
> possibility.
>
> Restore missing icons to the Windows Security Center:
> http://windowsxp.mvps.org/seccentericons.htm
>
> --
> Ramesh, Microsoft MVP
> Windows XP Shell/User
> http://windowsxp.mvps.org
>
>
> "Twanny" <Evenstar@Fastweb.net> wrote in message
> news:7FE87873-4811-4AAF-ABD9-F6C75A8FCC57@microsoft.com...
> > "Once upon a time . . . when Windows Secuirty Centre opened, there used to
> > be
> > 3 icons (right under Manage Security Settings for: Internet Options,
> > Automatic Updates & Windows Firewall).
> > Now the Brickwall Icon for the Firewall is missing, although at the top
> > the
> > Icon is visible and the setting is "ON". I hate it when something does not
> > work as it should.
> > Anyone encountered a similar event?
> > --
> > Rgds
> > "Twanny"
>
>

S.Sengupta
07-09-2005, 11:30 PM
Yes,Twanny,follow as suggested by Ramesh,MS-MVP.It will restore the
missing icon under the Security center.

regards,
ssg MS-MVP

Twanny wrote:
> Yes Ramesh, I did install Tweak UI recently - I will check there and also
> check the site you indicated.
> Thanks for now: I will advise later
> -----------
> Twanny
>
> "Ramesh, MS-MVP" wrote:
>
>
>>Twanny,
>>
>>Did you use Tweak UI and hide the firewall.cpl entry from Control Panel? If
>>that's the case, the Windows Firewall would be missing from Control Panel
>>_AND_ in the Security Center UI. If that's the case, you need to undo what
>>you did using Tweak UI. If that does not help, see here for another
>>possibility.
>>
>>Restore missing icons to the Windows Security Center:
>>http://windowsxp.mvps.org/seccentericons.htm
>>
>>--
>>Ramesh, Microsoft MVP
>>Windows XP Shell/User
>>http://windowsxp.mvps.org
>>
>>
>>"Twanny" <Evenstar@Fastweb.net> wrote in message
>>news:7FE87873-4811-4AAF-ABD9-F6C75A8FCC57@microsoft.com...
>>
>>>"Once upon a time . . . when Windows Secuirty Centre opened, there used to
>>>be
>>>3 icons (right under Manage Security Settings for: Internet Options,
>>>Automatic Updates & Windows Firewall).
>>>Now the Brickwall Icon for the Firewall is missing, although at the top
>>>the
>>>Icon is visible and the setting is "ON". I hate it when something does not
>>>work as it should.
>>>Anyone encountered a similar event?
>>>--
>>>Rgds
>>>"Twanny"
>>
>>

Twanny
07-09-2005, 11:31 PM
Hello again Ramesh: nothing to do with Tweak UI it seems.
Also I installed seccentericons.exe as per your link: it did add icons for
Local Security Policy and Group Policy Editor but not the Firewall icon! I
rebooted just in case with no change.

Twanny
-----------------

"Ramesh, MS-MVP" wrote:

> Twanny,
>
> Did you use Tweak UI and hide the firewall.cpl entry from Control Panel? If
> that's the case, the Windows Firewall would be missing from Control Panel
> _AND_ in the Security Center UI. If that's the case, you need to undo what
> you did using Tweak UI. If that does not help, see here for another
> possibility.
>
> Restore missing icons to the Windows Security Center:
> http://windowsxp.mvps.org/seccentericons.htm
>
> --
> Ramesh, Microsoft MVP
> Windows XP Shell/User
> http://windowsxp.mvps.org
>
>
> "Twanny" <Evenstar@Fastweb.net> wrote in message
> news:7FE87873-4811-4AAF-ABD9-F6C75A8FCC57@microsoft.com...
> > "Once upon a time . . . when Windows Secuirty Centre opened, there used to
> > be
> > 3 icons (right under Manage Security Settings for: Internet Options,
> > Automatic Updates & Windows Firewall).
> > Now the Brickwall Icon for the Firewall is missing, although at the top
> > the
> > Icon is visible and the setting is "ON". I hate it when something does not
> > work as it should.
> > Anyone encountered a similar event?
> > --
> > Rgds
> > "Twanny"
>
>

Ramesh, MS-MVP
07-09-2005, 11:32 PM
Twanny,

Are you able to launch the firewall configuration interface by typing
firewall.cpl in RUN? If so, then check for the don't load values:

Open Regedit.exe and navigate to:

HKEY_CURRENT_USER\Control Panel\don't load
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Control
Panel\don't load

If firewall.cpl value is present in the right-pane, delete it.

--
Ramesh, Microsoft MVP
Windows XP Shell/User
http://windowsxp.mvps.org


"Twanny" <Evenstar@Fastweb.net> wrote in message
news:FC342DC5-6E20-401F-8A3A-BDFA22505771@microsoft.com...
> Hello again Ramesh: nothing to do with Tweak UI it seems.
> Also I installed seccentericons.exe as per your link: it did add icons for
> Local Security Policy and Group Policy Editor but not the Firewall icon! I
> rebooted just in case with no change.
>
> Twanny
> -----------------
>
> "Ramesh, MS-MVP" wrote:
>
>> Twanny,
>>
>> Did you use Tweak UI and hide the firewall.cpl entry from Control Panel?
>> If
>> that's the case, the Windows Firewall would be missing from Control Panel
>> _AND_ in the Security Center UI. If that's the case, you need to undo
>> what
>> you did using Tweak UI. If that does not help, see here for another
>> possibility.
>>
>> Restore missing icons to the Windows Security Center:
>> http://windowsxp.mvps.org/seccentericons.htm
>>
>> --
>> Ramesh, Microsoft MVP
>> Windows XP Shell/User
>> http://windowsxp.mvps.org
>>
>>
>> "Twanny" <Evenstar@Fastweb.net> wrote in message
>> news:7FE87873-4811-4AAF-ABD9-F6C75A8FCC57@microsoft.com...
>> > "Once upon a time . . . when Windows Secuirty Centre opened, there used
>> > to
>> > be
>> > 3 icons (right under Manage Security Settings for: Internet Options,
>> > Automatic Updates & Windows Firewall).
>> > Now the Brickwall Icon for the Firewall is missing, although at the top
>> > the
>> > Icon is visible and the setting is "ON". I hate it when something does
>> > not
>> > work as it should.
>> > Anyone encountered a similar event?
>> > --
>> > Rgds
>> > "Twanny"
>>
>>

Twanny
07-09-2005, 11:32 PM
Thank you for your patience Remesh : plse see my comments under yours

"Ramesh, MS-MVP" wrote:

> Twanny,
>
> Are you able to launch the firewall configuration interface by typing
> firewall.cpl in RUN? If so, then check for the don't load values:
(Yes, was able to launch from here)
>
> Open Regedit.exe and navigate to:
>
> HKEY_CURRENT_USER\Control Panel\don't load
> HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Control
> Panel\don't load
>
> If firewall.cpl value is present in the right-pane, delete it.
(not present in the two instances - nothing to delete)
===================================
I want to point out that when I switched on PC this morning, the SC CP did
not contain any icons in the lower section. I then ran your application
again, and they were restored, NOT however the Firewall Icon. Anymore ideas
before I call Sherlock Holmes? :-)
----
Twanny
>
> --
> Ramesh, Microsoft MVP
> Windows XP Shell/User
> http://windowsxp.mvps.org
>
>
> "Twanny" <Evenstar@Fastweb.net> wrote in message
> news:FC342DC5-6E20-401F-8A3A-BDFA22505771@microsoft.com...
> > Hello again Ramesh: nothing to do with Tweak UI it seems.
> > Also I installed seccentericons.exe as per your link: it did add icons for
> > Local Security Policy and Group Policy Editor but not the Firewall icon! I
> > rebooted just in case with no change.
> >
> > Twanny
> > -----------------
> >
> > "Ramesh, MS-MVP" wrote:
> >
> >> Twanny,
> >>
> >> Did you use Tweak UI and hide the firewall.cpl entry from Control Panel?
> >> If
> >> that's the case, the Windows Firewall would be missing from Control Panel
> >> _AND_ in the Security Center UI. If that's the case, you need to undo
> >> what
> >> you did using Tweak UI. If that does not help, see here for another
> >> possibility.
> >>
> >> Restore missing icons to the Windows Security Center:
> >> http://windowsxp.mvps.org/seccentericons.htm
> >>
> >> --
> >> Ramesh, Microsoft MVP
> >> Windows XP Shell/User
> >> http://windowsxp.mvps.org
> >>
> >>
> >> "Twanny" <Evenstar@Fastweb.net> wrote in message
> >> news:7FE87873-4811-4AAF-ABD9-F6C75A8FCC57@microsoft.com...
> >> > "Once upon a time . . . when Windows Secuirty Centre opened, there used
> >> > to
> >> > be
> >> > 3 icons (right under Manage Security Settings for: Internet Options,
> >> > Automatic Updates & Windows Firewall).
> >> > Now the Brickwall Icon for the Firewall is missing, although at the top
> >> > the
> >> > Icon is visible and the setting is "ON". I hate it when something does
> >> > not
> >> > work as it should.
> >> > Anyone encountered a similar event?
> >> > --
> >> > Rgds
> >> > "Twanny"
> >>
> >>
>
>

Ramesh, MS-MVP
07-09-2005, 11:32 PM
No idea Twanny. Will research on this further. Perhaps a remote assistance
sessions might help.

--
Ramesh, Microsoft MVP
Windows XP Shell/User
http://windowsxp.mvps.org


"Twanny" <Evenstar@Fastweb.net> wrote in message
news:A4BE1B94-2DA4-424E-826B-B602CE3BF4AF@microsoft.com...
> Thank you for your patience Remesh : plse see my comments under yours
>
> "Ramesh, MS-MVP" wrote:
>
>> Twanny,
>>
>> Are you able to launch the firewall configuration interface by typing
>> firewall.cpl in RUN? If so, then check for the don't load values:
> (Yes, was able to launch from here)
>>
>> Open Regedit.exe and navigate to:
>>
>> HKEY_CURRENT_USER\Control Panel\don't load
>> HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Control
>> Panel\don't load
>>
>> If firewall.cpl value is present in the right-pane, delete it.
> (not present in the two instances - nothing to delete)
> ===================================
> I want to point out that when I switched on PC this morning, the SC CP did
> not contain any icons in the lower section. I then ran your application
> again, and they were restored, NOT however the Firewall Icon. Anymore
> ideas
> before I call Sherlock Holmes? :-)
> ----
> Twanny
>>
>> --
>> Ramesh, Microsoft MVP
>> Windows XP Shell/User
>> http://windowsxp.mvps.org
>>
>>
>> "Twanny" <Evenstar@Fastweb.net> wrote in message
>> news:FC342DC5-6E20-401F-8A3A-BDFA22505771@microsoft.com...
>> > Hello again Ramesh: nothing to do with Tweak UI it seems.
>> > Also I installed seccentericons.exe as per your link: it did add icons
>> > for
>> > Local Security Policy and Group Policy Editor but not the Firewall
>> > icon! I
>> > rebooted just in case with no change.
>> >
>> > Twanny
>> > -----------------
>> >
>> > "Ramesh, MS-MVP" wrote:
>> >
>> >> Twanny,
>> >>
>> >> Did you use Tweak UI and hide the firewall.cpl entry from Control
>> >> Panel?
>> >> If
>> >> that's the case, the Windows Firewall would be missing from Control
>> >> Panel
>> >> _AND_ in the Security Center UI. If that's the case, you need to undo
>> >> what
>> >> you did using Tweak UI. If that does not help, see here for another
>> >> possibility.
>> >>
>> >> Restore missing icons to the Windows Security Center:
>> >> http://windowsxp.mvps.org/seccentericons.htm
>> >>
>> >> --
>> >> Ramesh, Microsoft MVP
>> >> Windows XP Shell/User
>> >> http://windowsxp.mvps.org
>> >>
>> >>
>> >> "Twanny" <Evenstar@Fastweb.net> wrote in message
>> >> news:7FE87873-4811-4AAF-ABD9-F6C75A8FCC57@microsoft.com...
>> >> > "Once upon a time . . . when Windows Secuirty Centre opened, there
>> >> > used
>> >> > to
>> >> > be
>> >> > 3 icons (right under Manage Security Settings for: Internet Options,
>> >> > Automatic Updates & Windows Firewall).
>> >> > Now the Brickwall Icon for the Firewall is missing, although at the
>> >> > top
>> >> > the
>> >> > Icon is visible and the setting is "ON". I hate it when something
>> >> > does
>> >> > not
>> >> > work as it should.
>> >> > Anyone encountered a similar event?
>> >> > --
>> >> > Rgds
>> >> > "Twanny"
>> >>
>> >>
>>
>>

Twanny
07-09-2005, 11:32 PM
OK Ramesh: don't want you to dedicate too much time: after all, it's only a
minor inconvenience. I will definitely advise you if something comes up on
the matter - in the meantime, thanks again.
---------
Twanny

"Ramesh, MS-MVP" wrote:

> No idea Twanny. Will research on this further. Perhaps a remote assistance
> sessions might help.
>
> --
> Ramesh, Microsoft MVP
> Windows XP Shell/User
> http://windowsxp.mvps.org
>
>
> "Twanny" <Evenstar@Fastweb.net> wrote in message
> news:A4BE1B94-2DA4-424E-826B-B602CE3BF4AF@microsoft.com...
> > Thank you for your patience Remesh : plse see my comments under yours
> >
> > "Ramesh, MS-MVP" wrote:
> >
> >> Twanny,
> >>
> >> Are you able to launch the firewall configuration interface by typing
> >> firewall.cpl in RUN? If so, then check for the don't load values:
> > (Yes, was able to launch from here)
> >>
> >> Open Regedit.exe and navigate to:
> >>
> >> HKEY_CURRENT_USER\Control Panel\don't load
> >> HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Control
> >> Panel\don't load
> >>
> >> If firewall.cpl value is present in the right-pane, delete it.
> > (not present in the two instances - nothing to delete)
> > ===================================
> > I want to point out that when I switched on PC this morning, the SC CP did
> > not contain any icons in the lower section. I then ran your application
> > again, and they were restored, NOT however the Firewall Icon. Anymore
> > ideas
> > before I call Sherlock Holmes? :-)
> > ----
> > Twanny
> >>
> >> --
> >> Ramesh, Microsoft MVP
> >> Windows XP Shell/User
> >> http://windowsxp.mvps.org
> >>
> >>
> >> "Twanny" <Evenstar@Fastweb.net> wrote in message
> >> news:FC342DC5-6E20-401F-8A3A-BDFA22505771@microsoft.com...
> >> > Hello again Ramesh: nothing to do with Tweak UI it seems.
> >> > Also I installed seccentericons.exe as per your link: it did add icons
> >> > for
> >> > Local Security Policy and Group Policy Editor but not the Firewall
> >> > icon! I
> >> > rebooted just in case with no change.
> >> >
> >> > Twanny
> >> > -----------------
> >> >
> >> > "Ramesh, MS-MVP" wrote:
> >> >
> >> >> Twanny,
> >> >>
> >> >> Did you use Tweak UI and hide the firewall.cpl entry from Control
> >> >> Panel?
> >> >> If
> >> >> that's the case, the Windows Firewall would be missing from Control
> >> >> Panel
> >> >> _AND_ in the Security Center UI. If that's the case, you need to undo
> >> >> what
> >> >> you did using Tweak UI. If that does not help, see here for another
> >> >> possibility.
> >> >>
> >> >> Restore missing icons to the Windows Security Center:
> >> >> http://windowsxp.mvps.org/seccentericons.htm
> >> >>
> >> >> --
> >> >> Ramesh, Microsoft MVP
> >> >> Windows XP Shell/User
> >> >> http://windowsxp.mvps.org
> >> >>
> >> >>
> >> >> "Twanny" <Evenstar@Fastweb.net> wrote in message
> >> >> news:7FE87873-4811-4AAF-ABD9-F6C75A8FCC57@microsoft.com...
> >> >> > "Once upon a time . . . when Windows Secuirty Centre opened, there
> >> >> > used
> >> >> > to
> >> >> > be
> >> >> > 3 icons (right under Manage Security Settings for: Internet Options,
> >> >> > Automatic Updates & Windows Firewall).
> >> >> > Now the Brickwall Icon for the Firewall is missing, although at the
> >> >> > top
> >> >> > the
> >> >> > Icon is visible and the setting is "ON". I hate it when something
> >> >> > does
> >> >> > not
> >> >> > work as it should.
> >> >> > Anyone encountered a similar event?
> >> >> > --
> >> >> > Rgds
> >> >> > "Twanny"
> >> >>
> >> >>
> >>
> >>
>
>

Ramesh, MS-MVP
07-09-2005, 11:32 PM
No problem Twanny. I'll post back if I find any solution.

--
Ramesh, Microsoft MVP
Windows XP Shell/User
http://windowsxp.mvps.org


"Twanny" <Evenstar@Fastweb.net> wrote in message
news:7097DE96-3D6D-4917-98E7-D381FF7B1B73@microsoft.com...
> OK Ramesh: don't want you to dedicate too much time: after all, it's only
> a
> minor inconvenience. I will definitely advise you if something comes up on
> the matter - in the meantime, thanks again.
> ---------
> Twanny
>
> "Ramesh, MS-MVP" wrote:
>
>> No idea Twanny. Will research on this further. Perhaps a remote
>> assistance
>> sessions might help.
>>
>> --
>> Ramesh, Microsoft MVP
>> Windows XP Shell/User
>> http://windowsxp.mvps.org
>>
>>
>> "Twanny" <Evenstar@Fastweb.net> wrote in message
>> news:A4BE1B94-2DA4-424E-826B-B602CE3BF4AF@microsoft.com...
>> > Thank you for your patience Remesh : plse see my comments under yours
>> >
>> > "Ramesh, MS-MVP" wrote:
>> >
>> >> Twanny,
>> >>
>> >> Are you able to launch the firewall configuration interface by typing
>> >> firewall.cpl in RUN? If so, then check for the don't load values:
>> > (Yes, was able to launch from here)
>> >>
>> >> Open Regedit.exe and navigate to:
>> >>
>> >> HKEY_CURRENT_USER\Control Panel\don't load
>> >> HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Control
>> >> Panel\don't load
>> >>
>> >> If firewall.cpl value is present in the right-pane, delete it.
>> > (not present in the two instances - nothing to delete)
>> > ===================================
>> > I want to point out that when I switched on PC this morning, the SC CP
>> > did
>> > not contain any icons in the lower section. I then ran your application
>> > again, and they were restored, NOT however the Firewall Icon. Anymore
>> > ideas
>> > before I call Sherlock Holmes? :-)
>> > ----
>> > Twanny
>> >>
>> >> --
>> >> Ramesh, Microsoft MVP
>> >> Windows XP Shell/User
>> >> http://windowsxp.mvps.org
>> >>
>> >>
>> >> "Twanny" <Evenstar@Fastweb.net> wrote in message
>> >> news:FC342DC5-6E20-401F-8A3A-BDFA22505771@microsoft.com...
>> >> > Hello again Ramesh: nothing to do with Tweak UI it seems.
>> >> > Also I installed seccentericons.exe as per your link: it did add
>> >> > icons
>> >> > for
>> >> > Local Security Policy and Group Policy Editor but not the Firewall
>> >> > icon! I
>> >> > rebooted just in case with no change.
>> >> >
>> >> > Twanny
>> >> > -----------------
>> >> >
>> >> > "Ramesh, MS-MVP" wrote:
>> >> >
>> >> >> Twanny,
>> >> >>
>> >> >> Did you use Tweak UI and hide the firewall.cpl entry from Control
>> >> >> Panel?
>> >> >> If
>> >> >> that's the case, the Windows Firewall would be missing from Control
>> >> >> Panel
>> >> >> _AND_ in the Security Center UI. If that's the case, you need to
>> >> >> undo
>> >> >> what
>> >> >> you did using Tweak UI. If that does not help, see here for another
>> >> >> possibility.
>> >> >>
>> >> >> Restore missing icons to the Windows Security Center:
>> >> >> http://windowsxp.mvps.org/seccentericons.htm
>> >> >>
>> >> >> --
>> >> >> Ramesh, Microsoft MVP
>> >> >> Windows XP Shell/User
>> >> >> http://windowsxp.mvps.org
>> >> >>
>> >> >>
>> >> >> "Twanny" <Evenstar@Fastweb.net> wrote in message
>> >> >> news:7FE87873-4811-4AAF-ABD9-F6C75A8FCC57@microsoft.com...
>> >> >> > "Once upon a time . . . when Windows Secuirty Centre opened,
>> >> >> > there
>> >> >> > used
>> >> >> > to
>> >> >> > be
>> >> >> > 3 icons (right under Manage Security Settings for: Internet
>> >> >> > Options,
>> >> >> > Automatic Updates & Windows Firewall).
>> >> >> > Now the Brickwall Icon for the Firewall is missing, although at
>> >> >> > the
>> >> >> > top
>> >> >> > the
>> >> >> > Icon is visible and the setting is "ON". I hate it when something
>> >> >> > does
>> >> >> > not
>> >> >> > work as it should.
>> >> >> > Anyone encountered a similar event?
>> >> >> > --
>> >> >> > Rgds
>> >> >> > "Twanny"
>> >> >>
>> >> >>
>> >>
>> >>
>>
>>


XP Security Centre