[lior buganim]

Hello all,

I am using CompactFlash San disk Ultra 2 (Removable) ,
This is the only disk in my sys (JRex comuter).
The CF is bootable using bootprep.

In oher computer (for ex : XX computer) I preapare the Image with
configuration EWF RAM Reg mode , I used in component : "EWF Ram Registry SP2"
(Solbodan)

I run check dependencies and build the image.

then , I plug Card Reader to XX computer and copy the image to the CF.
then , I took the CF (eject from Card Reader) and plug it to JRex computer.

now I turn on the JRex computer and FBA running (Reg components..)
until I got the Windows XP embedded OS.

I press on Start --> Run --> cmd ,the Dos win opened .
I wrote : ewfmgr c:
and I got :
Protected volume configuration
Type RAM (REG)
State Disable .....

now I wrote the command :ewfmgr c: -enable
i reboot the system the state is ENABLED.

My question is how i make it disable again ????
if i run the command : ewfmgr c: -commitanddisable
i got : " ***commiting data and disabling overlay "
and the dos windows is stuk!!!
What I Can Do ????? HELP

[Franz Leu]

Lior

Try:
ewfmgr c: -commitanddisable -live
If you look at the ewfmgr c: is there a lot of data in th e overlay to
commit?
Is there enough space on the C?

Franz

"lior buganim" <liorbuganim@discussions.microsoft.com> schrieb im
Newsbeitrag news:4667254C-89AB-40C7-91EE-424DE822718D@microsoft.com...
> Hello all,
>
> I am using CompactFlash San disk Ultra 2 (Removable) ,
> This is the only disk in my sys (JRex comuter).
> The CF is bootable using bootprep.
>
> In oher computer (for ex : XX computer) I preapare the Image with
> configuration EWF RAM Reg mode , I used in component : "EWF Ram Registry
> SP2"
> (Solbodan)
>
> I run check dependencies and build the image.
>
> then , I plug Card Reader to XX computer and copy the image to the CF.
> then , I took the CF (eject from Card Reader) and plug it to JRex
> computer.
>
> now I turn on the JRex computer and FBA running (Reg components..)
> until I got the Windows XP embedded OS.
>
> I press on Start --> Run --> cmd ,the Dos win opened .
> I wrote : ewfmgr c:
> and I got :
> Protected volume configuration
> Type RAM (REG)
> State Disable .....
>
> now I wrote the command :ewfmgr c: -enable
> i reboot the system the state is ENABLED.
>
> My question is how i make it disable again ????
> if i run the command : ewfmgr c: -commitanddisable
> i got : " ***commiting data and disabling overlay "
> and the dos windows is stuk!!!
> What I Can Do ????? HELP
>
>
>
>
>
>
>

[lior buganim]

First of all , Thank U very much , It is work now!
My question now is , why in commitanddisable (without -live) is not working ?

"Franz Leu" wrote:

> Lior
>
> Try:
> ewfmgr c: -commitanddisable -live
> If you look at the ewfmgr c: is there a lot of data in th e overlay to
> commit?
> Is there enough space on the C?
>
> Franz
>
> "lior buganim" <liorbuganim@discussions.microsoft.com> schrieb im
> Newsbeitrag news:4667254C-89AB-40C7-91EE-424DE822718D@microsoft.com...
> > Hello all,
> >
> > I am using CompactFlash San disk Ultra 2 (Removable) ,
> > This is the only disk in my sys (JRex comuter).
> > The CF is bootable using bootprep.
> >
> > In oher computer (for ex : XX computer) I preapare the Image with
> > configuration EWF RAM Reg mode , I used in component : "EWF Ram Registry
> > SP2"
> > (Solbodan)
> >
> > I run check dependencies and build the image.
> >
> > then , I plug Card Reader to XX computer and copy the image to the CF.
> > then , I took the CF (eject from Card Reader) and plug it to JRex
> > computer.
> >
> > now I turn on the JRex computer and FBA running (Reg components..)
> > until I got the Windows XP embedded OS.
> >
> > I press on Start --> Run --> cmd ,the Dos win opened .
> > I wrote : ewfmgr c:
> > and I got :
> > Protected volume configuration
> > Type RAM (REG)
> > State Disable .....
> >
> > now I wrote the command :ewfmgr c: -enable
> > i reboot the system the state is ENABLED.
> >
> > My question is how i make it disable again ????
> > if i run the command : ewfmgr c: -commitanddisable
> > i got : " ***commiting data and disabling overlay "
> > and the dos windows is stuk!!!
> > What I Can Do ????? HELP
> >
> >
> >
> >
> >
> >
> >
>
>

[Slobodan Brcin \(eMVP\)]

lior,

> My question now is , why in commitanddisable (without -live) is not working ?

If commitanddisable -live is working then commitanddisable must work also since plain commitanddisable do nothing except setting one
flag in ewf driver for usi during the shutdown.
I would understand that you had problems with live switch but without live it just do not make sense.

Please make a bug report to MS:
http://msdn.microsoft.com/embedded/community/community/feedback/feedxp/default.aspx

Regards,
Slobodan




> "Franz Leu" wrote:
>
> > Lior
> >
> > Try:
> > ewfmgr c: -commitanddisable -live
> > If you look at the ewfmgr c: is there a lot of data in th e overlay to
> > commit?
> > Is there enough space on the C?
> >
> > Franz
> >
> > "lior buganim" <liorbuganim@discussions.microsoft.com> schrieb im
> > Newsbeitrag news:4667254C-89AB-40C7-91EE-424DE822718D@microsoft.com...
> > > Hello all,
> > >
> > > I am using CompactFlash San disk Ultra 2 (Removable) ,
> > > This is the only disk in my sys (JRex comuter).
> > > The CF is bootable using bootprep.
> > >
> > > In oher computer (for ex : XX computer) I preapare the Image with
> > > configuration EWF RAM Reg mode , I used in component : "EWF Ram Registry
> > > SP2"
> > > (Solbodan)
> > >
> > > I run check dependencies and build the image.
> > >
> > > then , I plug Card Reader to XX computer and copy the image to the CF.
> > > then , I took the CF (eject from Card Reader) and plug it to JRex
> > > computer.
> > >
> > > now I turn on the JRex computer and FBA running (Reg components..)
> > > until I got the Windows XP embedded OS.
> > >
> > > I press on Start --> Run --> cmd ,the Dos win opened .
> > > I wrote : ewfmgr c:
> > > and I got :
> > > Protected volume configuration
> > > Type RAM (REG)
> > > State Disable .....
> > >
> > > now I wrote the command :ewfmgr c: -enable
> > > i reboot the system the state is ENABLED.
> > >
> > > My question is how i make it disable again ????
> > > if i run the command : ewfmgr c: -commitanddisable
> > > i got : " ***commiting data and disabling overlay "
> > > and the dos windows is stuk!!!
> > > What I Can Do ????? HELP
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >