Editing regisrty vaule.



Edward
07-10-2005, 12:23 AM
basicaly i've had this error explained in this artical here :

http://www.microsoft.com/resources/documentation/Windows/XP/all/reskit/en-us/prmd_stp_fztl.asp?


now towards the bottom it says :

If SystemPages is not zero, assign a value of 40000 for systems with 128 MB
(or less) of memory, or 110000 for systems with 128 MB to 256 MB of memory.
For systems with more memory, do not increase the SystemPages value above
110000 without contacting Microsoft technical support.

now i am running 1.5gb of 400 DDR ram , whatr should my setting be? atm i
got it on 110000 but sitll get the errror sometimes.

what is the appopiate setting for me?

Thanks in advance !

Sharon F
07-10-2005, 12:23 AM
On Thu, 12 May 2005 09:12:59 -0700, Edward wrote:

> basicaly i've had this error explained in this artical here :
>
> http://www.microsoft.com/resources/documentation/Windows/XP/all/reskit/en-us/prmd_stp_fztl.asp?
>
>
> now towards the bottom it says :
>
> If SystemPages is not zero, assign a value of 40000 for systems with 128 MB
> (or less) of memory, or 110000 for systems with 128 MB to 256 MB of memory.
> For systems with more memory, do not increase the SystemPages value above
> 110000 without contacting Microsoft technical support.
>
> now i am running 1.5gb of 400 DDR ram , whatr should my setting be? atm i
> got it on 110000 but sitll get the errror sometimes.
>
> what is the appopiate setting for me?
>
> Thanks in advance !

According to the article your setting should be 110000 - what you're
currently using. Many XP systems have a gig or more of memory these days
and run without problems. Is it possible that you're on the wrong track?
Have you followed up on the other solutions suggested in the article?

--
Sharon F
MS-MVP ~ Windows Shell/User

Edward
07-10-2005, 12:24 AM
"Sharon F" wrote:

> On Thu, 12 May 2005 09:12:59 -0700, Edward wrote:
>
> > basicaly i've had this error explained in this artical here :
> >
> > http://www.microsoft.com/resources/documentation/Windows/XP/all/reskit/en-us/prmd_stp_fztl.asp?
> >
> >
> > now towards the bottom it says :
> >
> > If SystemPages is not zero, assign a value of 40000 for systems with 128 MB
> > (or less) of memory, or 110000 for systems with 128 MB to 256 MB of memory.
> > For systems with more memory, do not increase the SystemPages value above
> > 110000 without contacting Microsoft technical support.
> >
> > now i am running 1.5gb of 400 DDR ram , whatr should my setting be? atm i
> > got it on 110000 but sitll get the errror sometimes.
> >
> > what is the appopiate setting for me?
> >
> > Thanks in advance !
>
> According to the article your setting should be 110000 - what you're
> currently using. Many XP systems have a gig or more of memory these days
> and run without problems. Is it possible that you're on the wrong track?
> Have you followed up on the other solutions suggested in the article?
>
> --
> Sharon F
> MS-MVP ~ Windows Shell/User
>

well it says for 128 MB to 256 MB = 110000 and to ask support staff for more
what the setting should be.

btw my comp basic specs = AND athlon 64 proessor 3400+
2.4GHz
1.5 GB of DDR RAM ( 400 )

so for my 1.5 gb is would be loads more then 110000 correct? i am sure i am
on the right track i followe dup all other aspects of the artical and i
founbd this to be the only saoulution as its a fairley new computer also.

Edward


Editing regisrty vaule.