[sc21235]

I have beed trying to install XPe (SP2) on a DigitalLogic PC104, Pentium
M Single Board Computer for quite a while now.

My problem is, that the FBA stops with a 000021a, Status 0x000026c. My
ntbtlog seams OK, IMAPI.sys and redbook.sys (?) are not loaded. Last
line reads NTFS.sys loaded. In my \Windows\FBA directory is no
fbalog.txt.

The import of the devices.pmq I received after running TAP.exe fails on
"driver vor Standardvolume (STORAGE\Volume)" twice, my graphics card (I
am using VGA save instead), and "Audiocontroller for Multimedia".

The Support from DigitalLogic could not help with this very specific
question and directed me to this forum.

Therefore here are my questions:
+ How can I find the failing driver in the FBA ?
+ Is one of the "failed import" devices a essential device ?
+ Why does my fbalog.txt does not show up ?

Sorry, if there is a "search the forum" question in these, but
searching the forum, if you don't know what to search for, is a real
pain.

Thanks in advance.


--
sc21235
------------------------------------------------------------------------
sc21235's Profile: http://www.msusenet.com/member.php?userid=1344
View this thread: http://www.msusenet.com/t-1870437331

[Slobodan Brcin \(eMVP\)]

Few searches trough all NG, but no good results there:
http://groups-beta.google.com/groups?q=0x000026c
http://groups-beta.google.com/groups?q=0x000021a


Have you seen fba start and then BSOD?
Or you see this list shown by ntldr in text mode?

You might want to create enmpty project without any TAP results. By simply
adding component Minlogo Sample macro and then resolving all dependencies.
If this workd try adding TAP results to that image.

Regards,
Slobodan




"sc21235" <sc21235.1p6bwf@no-mx.msusenet.com> wrote in message
news:sc21235.1p6bwf@no-mx.msusenet.com...
>
> I have beed trying to install XPe (SP2) on a DigitalLogic PC104, Pentium
> M Single Board Computer for quite a while now.
>
> My problem is, that the FBA stops with a 000021a, Status 0x000026c. My
> ntbtlog seams OK, IMAPI.sys and redbook.sys (?) are not loaded. Last
> line reads NTFS.sys loaded. In my \Windows\FBA directory is no
> fbalog.txt.
>
> The import of the devices.pmq I received after running TAP.exe fails on
> "driver vor Standardvolume (STORAGE\Volume)" twice, my graphics card (I
> am using VGA save instead), and "Audiocontroller for Multimedia".
>
> The Support from DigitalLogic could not help with this very specific
> question and directed me to this forum.
>
> Therefore here are my questions:
> + How can I find the failing driver in the FBA ?
> + Is one of the "failed import" devices a essential device ?
> + Why does my fbalog.txt does not show up ?
>
> Sorry, if there is a "search the forum" question in these, but
> searching the forum, if you don't know what to search for, is a real
> pain.
>
> Thanks in advance.
>
>
> --
> sc21235
> ------------------------------------------------------------------------
> sc21235's Profile: http://www.msusenet.com/member.php?userid=1344
> View this thread: http://www.msusenet.com/t-1870437331
>